BROADLINK LC1 Smart WiFi Wall Switch (Requires S3 Hub to work) - Affordable Smart Home Solutions

🌟 Mobile App: If you want to control LC1 Switches via the BroadLink Mobile App at home or remotely out of home and/or set routines, timers and schedules, you MUST have at least 1 x S3 Hub (sold separately). LC1 must also be within S3 Hub effective range (S3 Hub supports up to 8 x devices within 8-10m in a home setting without a line of sight).

🌟 Sizing: Singapore Standard 86x86mm (30mm depth)

🌟 State Feedback: Pairing LC1 with S3 Hub, you will also have state feedback of the switch where you will be able to view from the BroadLink App which gangs are currently ON and OFF.

🌟 Routine Programmable Smart Button: During the installation of LC1 Switch, you can intentionally leave the last gang unwired, not connected to any light(s) and within the BroadLink app, set routines for that unwired last gang.

❗ All LC1 switches are SINGLE WAY only in 1/2/3 gang configuration. All LC1 switches do not support WIRED TWO WAY or MULTI WAY points i.e. two different switch controlling the same single/set of lights. If you want to use LC1 switches and have existing wired two-way points, you need to disable one of the two ways prior to the installation of LC1 switch. LC1 is also non-dimmable and does not work with dimmable bulbs or drivers.

Note:

*Always engage a trained electrician to install this type of switch. Do not attempt to install on your own if you have little or no experience with electrical wiring work.