LiitoKala Lii-S8/S12 Battery Charger Li-ion 3.7V NiMH 1.2V Li-FePO4 3.2V IMR 3.8V charger for 18650 26650 21700 26700 AA AAA

Specification for Charger LII-S8   I. Warning:   1. This charger can only charge cylindrical lithium ion battery (Li-Ion-3.70V /3.80V), lithium iron phosphate battery (LifePO4-3.20V), and ni-MH/NICd-1.20V; And the square 9V ni-MH-9V rechargeable battery;   2. Before use, please carefully refer to the manual, pay attention to the recommended charging current of the rechargeable battery, do not exceed the recommended charging current;   3. Choose to use the 12.0V DC adapter, and the supply current shall not be less than 4.0A (ampere);   4. The charger may get hot when charging, please put it out of the reach of children to charge;   5. When it stops using, please unplug the power and remove the battery;   6. It can only be used at room temperature.   7. The test data of this product is for reference only, please refer to professional instruments for the actual situation.   Ii. Charger Specifications and Functions:   1. Dc12.0v 4.0A(minimum) input, intelligent charging and microcomputer management system for each tank;   2. The biggest highlight of this charger is that it can charge rapidly with multiple channels of 2 amps at the same time and 9V nickel metal hydride charging battery;   3. Charging current has five grades 0.30A/0.50A /0.70A /1.00A/2.00A;   4. Charging current:   4.1 lithium-ion batteries (3.70 V / 3.80 V) and lithium iron phosphate batteries (3.20 V) on electricity, according to buy battery internal resistance by detecting system automatic configuration CURRENT size, if you want to change the charging electric CURRENT size can be long press CURRENT, first to flash show short when CURRENT value according to the CURRENT key, you can select charging CURRENT (A/A / 0.50 0.30 0.70 2.00 1.00 A/A/A) (note: in the first 1/3/6/8 slot maximum charging CURRENT is 2.0 A, 1.0 A maximum in the first 2/4/5/7 slots). The charging current between the first and second slots, the third and fourth slots, the fifth and sixth slots, and the seventh and eighth slots will not exceed 2A in total, that is, when one slot is charged with 2A current, and then put the battery into the other slot, the 2A current will fall back to 1A current charging;   4.2Ni-MH/Ni-Cd battery (1.20V) charging current is fixed at 0.50A, and current cannot be selected;   4.3 The nickel metal hydride (9.0V) rechargeable battery can be charged in a specific place, and two batteries can be charged at the same time. The charging current of each battery is about 85mA;