RISC-V Milk-V Duo Development Board+USB HUB Expansion Board CV1800B Support Linux for IoT Enthusiasts DIY Gamers

[Product parameters].Processor: CVITEK CV1800B (906@1GHz; 906@700MHz).Memory: DDR2 64MB.Storage: 1 Mirco SD slot, 1 SD pad.USB: 1 Type-C for data and power, 1 USB2 pad.Camera: 1 16P FPC socket (MIPI 2 channels).GPIO : 26 pins available for I/O (GPIO).Size: 21mm x 51mm

processor:.1GHz and 70OMHZ RISC-V C906 processor []Integrate CVITEK TPU to realize intelligent detection.Support 264/265 video encoding, up to 2880x1620@20fps.Compatible with HD CMOS sensors.Programmable frequency output for sensor clock.Comprehensive ISP features for image optimization.Some OpenCV libraries support CV hardware acceleration.16-bit audio codec with built-in microphone input and output.Flexible network configuration with 1 Ethernet PHY

-2 (MIPI Serial Camera):With 16-pin FPC interface for 2-wire MIPI camera input. Operate l2C, CLK and signals at 1.8V voltage level. Ethernet:Milk-V Duo includes CV1800B chip and 100Mbps physical layer,PHY connected to 5-pin pad Ethernet use requires external transformer and RJ45 socket

-2 (MIPl Serial Camera):With 16-pin FPC interface for 2-wire MIPI camera input. Operate l2C, CLK and signals at 1.8V voltage level. GPIOs:Up to 26 GPIO pins on the MilkV Duo 40-pin header to access internal peripherals such as SDIO, I2C, PWM, SPI, J-TAG, and UART.Up to 3xI2C. up to 5xUART. Up to 1xSDIO1. Up to 1xSPI. Up to 2xADC. Up to 7xPWM. Up to 1xRUN. Up to 1xJTAG USB interface:

Compatible with USB 2.0, backward compatible with USB 1.1

Support for various speed modes, host/device capabilities and transports

protocol:

Scalable interface via USB hub (up to 127 devices)

Power saving mode, support HID devices

USB with configurable software

USB Type-C for accessing storage media

-SD:

SDIO 0 is compatible with the Secure Digital Storage (SD3.0) protocol

Board Specifications:

Single-sided PCB

Size: 51x21mm

Thickness: 1mm

Type-C port located on the top edge

Dual Slotted/Through Hole Headers Around Remaining Edge

Available as surface mount modules or in dual in-line package (DIP) format

40 primary user pins on 2.54mm (0.1inch) pitch grid with 1mm holes

Compatible with veroboard and breadboard

Please note that due to different batches, there may be differences in the appearance, color, and printing of the product, which will not affect its use

Colour: random color , don't accept the specified color

Material:PCB Package Contents:

1 x Development Board (random colors, don't accept the specified color) 1 x USB HUB Expansion Board Only the above package content, other products are not included.