IRS2092S 500W Mono Channel Class D HIFI Power Amp Board I2Q4 Digital Amplifier

This is pure power amplifier board, the sensitivity of the input signal of 1.5V rms, if your input signal voltage can'for t reach this value,recommend add preamp.

Mono channel,for 2.0 channel need bid two.

Features:

Use precautions:

1. Rated supply voltage is ±65V, ±58---±70V range, do not over 70V! positive and negative do not pick wrong

2. Recommended power supply ±65V

3. Recommended 4-8Ω , 10-18inch speaker

4. Carefully check before electricity, ensure the wiring is correct.

Specifications:

1. Power supply: dual for DC power supply ± 58-± 70V

2. The rated output power: 500W (± 65V power supply, 4 ohm load, distortion 10%)

3. Efficiency:> = 90%

4. SNR: 90dB

5. The total harmonic distortion:

380W (± 65 power 4 ohm speaker, distortion <0.1%)

280W (± 65 power 8 ohm speaker, distortion <0.1%)

6. Frequency range: 20Hz-20KHz

7. Speaker: 4-8ohm

8. Voltage Magnification: 36 times

9. Input sensitivity 1.5V (RMS)

10. Output short circuit protection: Yes

11. That output for DC bias for protection speaker protection: Yes

12. Over-temperature protection: Yes, radiator FET temperature higher than 100 ° C, turn off the output!

13. Product Size: appro*. 100*50*30mm,3.93*1.96*1.18''

14. Net weight: appro*.100g

Note:

Please allow 1-3mm differs due to manual measurement.

Due to the different display and different light, the picture may not reflect the actual color of the item. Thanks for your understanding.

Included: