Overseas shipping,2 Port POE Extender 100Mbps with IEEE 802.3Af Standard for NVR IP Camera AP IP VOICE POE Extend 100 Meters for POE Range

2. Automatically detects and protects PoE equipment from being damaged by incorrect installation. Plug-and Play no configuration required

3. 2 Port PoE extender can forward both Ethernet and PoE power for 1 terminal equipment via Cat5 ,Cat5e,Cat6,Cat6e,UTP cable.

4. 2-Port PoE Extender has 3 10/100M Lan ports, among them, one for power input, the other two for power output. Comply with 10/100BASE-TX,IEEE 802.3 -PoE.

5. Used with AP, IP camera, IP telephone and the other network equipment in the situation of the lack of power line or far from the power outlets. Installed at hotels, schools, buildings, villages, etc. POE input: 1 RJ45 port

POE output: 2 RJ45 port

POE Pin Output: 1/2(+), 3/6(-); MAX Power 15W

Network Medium: Cat5 or better UTP cables (less than 120m)

Repeater Mode: Store and forward Address Table: 2K

Packet Buffer Memory: 48 Switching Capacity: 1.0Gbps

PoE Standard: IEEE 802.3af

Input power: 13 Output power: 12.2 Input voltage: 44-55V 0.5A

Output voltage: 44-55V 0.525A

Power Supply Type: 1/2+,3/6-,Mode A, End-Span

Network Protocol: IEEE 802.3i-10BASE-T, IEEE 802.3u: 100BASE-TX, IEEE 802.3x-Flow Control, IEEE 802.3af-Power over Ethernet;

Regulation Compliance: FCC Part 15B, ROHS Directive 2011/65/EU, Low Voltage Directive 2014/35/EU,EMC Directive 2004/108/EC;

Working temperature: -10°c to 45°c

Working Humidity: 5%-90%, No Condensation

color:Black

Material:Plastic + Metal

size:88 x 43 x 22mm Package Contents:

1 x 2 Port POE Extender Only the above package content, other products are not included.