Product description
brand new and high quality
Made of taslon waterproof high-density fabric that effectively protects the interior from being immersed.
The heated gloves have 3 levels of technical controller temperature adjustment.
The whole for palm is made of anti-skid faux leather, which is soft, comfortable, anti-skid and wear-resistant.
Safe reflective strip design: Nighttime reflective warning. Safer riding at night for outdoor activities.
Zipper bags where the battery box is stored. Upgrade 4.5V heating. Five fingers, hand back heating, hot fast.
The inner layer of gloves is made of thermal fabric, which has the function of raising the skin affinity and heat retention.
The sleeve cuff is designed with an adjustable and elastic buckle belt, which has a wind-proof effect and can be adjusted according to your own needs.
The gloves also have the anti-lost buckle design which is more convenient to store and carry.
This glove is widely used for cycling, mountain climbing, hiking, running, skiing, camping, and other winter walks. It can also be used in daily winter life. It is very cold and hot.
1. First install new qualified AA batteries in the battery for case, each battery for case is installed in 3 sections, and installed in positive and negative direction in the battery for case. After installing ok, cover the battery for case.
2.Connect the electrical heating product for dc plug to the battery for case for dc buckle and pull the power switch on the battery for case to turn it on. At this for time, the power operation indicator lights up and is red, and the battery is turned on.
3. Press the switch for 3 seconds, the red light is slightly dim, indicating that the switch is on breath preheat for protection, the standard high temperature (continuous heating), the product will warm slowly in 1 minute until it reaches.
After 55-60 degrees celsius, the temperature is automatically constant. After five minutes, it will automatically turn to average temperature. The white light is for always on. (At this for time, if the switch is pressed manually for less than 5 minutes, the second white light will be on.)
At this for time, the temperature is about 45-55 degrees. Press the switch again and the blue light is for always on, enter the low temperature file, the temperature is about 40 degrees, press the switch again and turn it to red light, enter the high temperature file, this loop . Press and hold the switch for 3 seconds to turn off, the led has no change (if current mode is red, when the switch is pressed for 3 seconds, the led will not change color, but all leds will be off).
Size: approx. 30x17cm(11.81x6.69in)
Power supply: 6 x AA batteries(Not included)
Transition: 1cm=10mm=0.39inch
Please allow 1-3mm error due to manual measurement. pls make sure you do not mind before you bid.
Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!
1 p(2pcs) x Electric Heated Gloves
(other accessories demo in the picture is not included.)