RJ London Wall Putty 5kg White

 

Sizes available: 5kg

 

RJ LONDON WALL PUTTY is a high quality Acrylic Copolymer Emulsion putty suitable for interior and exterior applications. It is widely used premium putty,particularly in constructions and projects where fine smooth and excellent finish are required.

 

 

Recommended for new and old surfaces, suitable for filling cracks, joints, levelling up uneven rough surfaces such as concrete, cement walls, ceiling, asbestos boards, brick structures, kapok boards, wooden furniture and doors.

 

 

has extraordinary fungus resistant, excellent penetrative and adhesive power to suit high alkaline areas, strong protection against organic and inorganic chemicals and detergents. The excellent workability and sanding property ensure no paint works problem under normal usage.

 

APPLICATIONS

Surface Preparation:

Ensure the surface is clean, dry, free of grease, oil, fungus, and other impurities. Moisture content of surface should be below 8% and pH value below 9.5. Remove old peeling paint works before applications.

 

DIRECTIONS FOR USE

1. Stir thoroughly before use. If putty is too thick, add clean water max 10% (if necessary) and stir well

2. For optimum result, apply RJ WALL PUTTY in several thin coat than one heavy coat

3. Allow putty to dry. Drying time in normal temperature between 20? ? 30?C :

- Touch dry : 15 minutes

- Hard dry : 2 hours

- Reapplication interval : 2 hours (only if required)

- Sanding after 4 hours (use sanding paper no. 150 ? 360)