2 Set of Solar Charge Controller LED Display 12V/24V Battery Regulator Industrial Energy Measurement Charging Regulating 30A

Easy installation: Make sure your battery has enough voltage for the controller to recognize the battery type before first installation. And the battery cable should be as short as possible to minimize loss.

Applications: The regulator is only suitable OPEN, AGM and GEL batteries, suitable for home and industrial occasions. It supports PWM battery charging.

Function: The charge regulator is only suitable for regulating solar modules. Never connect another charging source to the charge regulator.

System connection: Connect the battery to the charge regulator following the plus and minus pole. it will show 1 if it detects 12V battery, and show 2 if it detects 24V battery.

Operation: Connect the photovoltaic module to the regulator and connect the consumer to the charge regulator following the plus and minus pole. The reverse order applies when disassembling. An improper order will damage the controller.

Specification:

Battery Voltage : 12V/24V.

Charge Current : 30A/20A/10A.

Discharge Current : 30A/20A/10A.

Working Temperature : -35℃-60℃.

Application : Home, Industrial, Commercial.

Self consume : ≤10mA.

Charge : 13V.

Discharge stop :10.7V.

Discharge reconnect :12.6V.

Size : approx. 133x70x32mm/5.24x2.76x1.26inch.

12V battery can only access 18V-20V solar panels.

24V battery can only access 36-40V solar panels.

30A : 12V/360W(Max.), 24V/720W(Max.).

10A: 12V120W(Max.), 24V/240W(Max.).

20A: 12V/240W(Max.), 24V/480W(Max.).

Note:

Due to the light and screen difference, the item's color may be slightly different from the pictures.

Please allow a slight deviation for the measurement data and make sure you do not mind before ordering.

Package Includes:

2 Sets in total, each set contains the following products