Modern Minimalist Light Blue Solid Color and Plain Wallpaper Nordic Morandi Color Bedroom Living Room Non-Woven Wallpaper

Wallpaper Installation Steps

There Is Also a Process for Installing Wallpaper, Which Generally Includes Five Steps,

1. First of All, Clean the Base Layer and Fill the Gap. Joint Band Should Be Attached to the Joint of Gypsum Board Surface to Supplement Putty;

2, Puttying Grinding, in the Grassroots Processing, Must Be Cleaned, Smooth, Smooth;

3. Apply Desiccant, Moisture-Proof Paint Should Be Applied Evenly, Not Too Thick;

4. Cutting Paper and Gluing, You Can Use Plumb Lines to Mark the Width of Wallpaper on the Wall;

1. When You Are Wallpaper, the First Thing to Do Is to Use a Scraper to Flatten the Wall Surface, Clean up the Falling Wall Skin, and Then Remove the Dirt on the Wall Surface to Keep the Wall Surface Flat and Clean.

2. after the Wall Surface Is Cleaned and Leveled, We Need to Evenly Draw a Groove Mark on the Wall Surface with a Scraper. the Groove Mark Can Allow Wallpaper Agent to Quickly Penetrate into the Wall Surface.

3. after Finishing the Groove Marks Infiltrated by the Auxiliary Wallpaper Agent on the Wall, You Can Start to Apply Wallpaper Agent on the Wall. When Applying Wallpaper Agent, You Must Pay Attention to the Uniform Application.

4. after the Wallpaper Agent Is Evenly Applied to the Wall, It Takes about Five Minutes to Put Wallpaper on It. in This Time, We Can Prepare the Wallpaper and Cut the Wallpaper According to the Actual Size of the Wall.

5. after the Wallpaper Is Cut, We Can Start to Paste It on the Wall. We Must Pay Attention to Wallpaper from the Top to the Bottom When We Are Face Mask. Such a Layer-by-Layer Sticker. Also Pay Attention to the Place of the Corner Must Be Firmly Pasted, There Is No Gap.