Valve Core Remover Installer Tool Kit with Dual Size SAE 1/4 & 5/16 Port for with R22 R12 R407 R410 R404 R32 R600 HVAC System

Features:

1. Excellent workmanship: spool remover installation tool using solid brass, durable, not easy to rust; Metal knob adopts non-slip knurled design, durable and can be used for a long time.

2. Time saving: coring tool, easy to insert the inner valve, control the core, no need to stop or release refrigerant, easy to disassemble and install the spool, save hours of empting and charging time.

3. Spool remover installation tool, R410a spool remover tool, R22 spool Remover Tool, a/c Spool Remover Tool, HVAC Valve, spool remover tool, Schrader Spool Remover tool, compression small split system refrigeration and air conditioning services.

4. Used to remove and install spool in live system.

5. Basic operation of spool removal wrench:

1. Pull out the dead point on the valve stem, close the valve on the tool, adjust the connection between the tool and the air conditioner port, and tighten the valve on the air conditioner.

2. Ensure that the tool is tightly connected to the air conditioner valve, and then open the valve on the tool. Push the stem into the air conditioning valve and gently turn the rear knob of the remover. Find the Angle at which the spool is connected and release.

3. After removing the spool, pull out the valve stem, close the valve on the remover, loosen the screw at the end of the tool, and remove the spool. The job is done!

Note: It is recommended to close the spool wrench valve and disconnect the internal connection of the air conditioner before removing the spool.

Specifications:

Color: Yellow

Material: Copper

Contents of the package: