1/9pcs Household Mini Sewing Machine Suitable Portable Manual Sewing Machine Set Travel and Business Trips Convenient To Carry Diy Sewing Tools

 

Product Name: Mini Sewing Machine

 

Product material: plastic stainless steel

 

Product size: 25 * 15.5 * 3.5cm (one set size), sewing machine box size: 11 * 7 * 4.2cm

 

Product net weight: set 147g, single sewing machine 101g

 

Product packaging: paper card packaging

Tools/raw materials：

 

Mini mobile phone sewing machine thread threading machine

 

Method/Step：

 

First, let's talk about the usage of the needle piercer:

 

First, pass the needle piercer through the needle hole, and then pass the thread through the needle piercer. Pull the needle piercer back and the thread will come over, it's very simple.

 

Now let's start with the steps：

 

1. First, take a wire from the wire ball and pass it through the plastic hole from bottom to top. Then, clip the wire into the spring adjustment plate, which can be adjusted to a satisfactory position

 

2. Then pass the thread through the circular iron ring at the upper and lower ends of the machine, and hold the thread that passes through the iron ring. Now you can thread the needle. The technique of threading has already been mentioned, mainly to pay attention to the thread being threaded from right to left.

 

3. After threading the needle hole, the next step is to lift the thread pressing plate and pass the thread passing through the hole on the thread pressing plate. Next, we started sewing. Lift the pressure plate and place the fabric under the pressure plate. Press the pillow down on the fabric with your thumb, maintaining a uniform speed and force. After sewing, use scissors to pick out a piece of thread and cut it, so you don't have to thread it every time you use it. After taking off the machine, the thread ends at the back and tying a knot will be fine

 

matters needing attention：

 

The fabric is too thin or too thick to use, and the thickness should not exceed 0.8mm

 

Be sure to tie a knot at the end, otherwise the thread will loosen