WiFi Video Doorbell T8 Wireless Intercom Security Camera IP 720P Smart Door Bell Night Vision Apartment Home Outdoor Viewfinder

Material: ABS

Color:White,Black

Picture Resolution:1920*1080P/1080*720

PIR LEDIR LED: 6 lights,850mm

Wireless network: 2.4GHz(802.11b/g/n),not Support 5G

Installation methods: Gate or wall installation

Application: Outdoor

Video format:720P

Lens:140° wide angle lens

Night Vision:automatic switching

Night vision diance:6-8m

Charging voltage:DC 5V/1A

Waterproo leveI:IP65

Weight:285

Size:13.7*7.5*5.3cm

Feature:

--1080P Full HD

--Weather Resistant

--Two-way Audio

--Notification Push to Mobile Device

--2.4G Wi-Fi

--PIR Motion Detection

--Night Vision

--166° Wide-angle Camera Lens

--Long Battery life

--7days Free Cloud Service

Troubleshooting:

Q:My signal is poor on my doorbell?

A:Your doorbell maybe too far away from your wireless router or you may have some obstructions in between that reduce signal strength.You might try repositioning your router or getting a signal extender/repeater for your wireless router.

Q:How do I RESET the doorbell?

A:Press and hold the RESET Button for 6 seconds.

Q:How do I share the video doorbell with my family?

A: 1.Open the ToSee APP:

From the home page,tap the doorbell Live View.

Tap the ldquoShare iconrdquo in the top right corner.

Enter the device administrator password,then tap ldquoconfirmrdquo.

Taprdquo+rdquo.

Enter the new userrsquos Nickname,then tap ldquoConfirmrdquo.You will see a QR code.

2.Open the ToSee APP on the new userrsquos cellphone.

From the home page,taprdquo+rdquoin the top right corner.

TaprdquoScan QR coderdquo,the scan the QR code generated before.

You will see rdquoSuccessrdquo,then tap ldquoConfirmrdquo.

Enter a Device Name.Tap ldquoConfirmrdquoand yoursquore all set!

Q:How do I adjust PIR motion detection sensitivity?

A: 1.From the device list page,tap the ldquoLive Viewrdquo.

2.Tap ldquoSettingsrdquoin the top right corner.

3.Tap ldquoMotion Detection Sensitivityrdquo

PIR Motion Detection Sensitivity

PIR Motion Sensor Disabled

10-second delay trigger on PIR motion detection

5-second delay trigger on PIR motion detection

No Delay on PIR motion detection

Q:How many user can view the video at the same time?

A:Up to 4 users may view the video feed,but only 1 user can user the direct intercom.Both iOS and Android are compatible.

Q:Is 5GHz WiFi supported?

A:No.Only 2.4GHz WiFi is supported.

Q:I order with battery, why I can't turn on the camera?

A:All battery sent with a Insulating film, you shall move out it before you use

Q:Is the night mode on auto at night?

A:Yes, It build in Photosensitive chip, Night mode will on auto at night.

Q:My house is a villa, I don't want the camera doorbell call me always. How can I do?

A:In the setting, you can Turn off the PIR detection. Then it will not call you if no body click the doorbell button.

Q: Sometimes, the camera will disconnection in my phone, how can I do?

A: Transfer wifi connect to 4G, or transfer 4G to wifi. and then restart the Aiwit APP. If problem can't be solve, then restart the doorbell.

Q: What AC power it support?

A:NO, not support.

Q: Is every doorbell check before shipping?

A: Yes.Before we sent, all doorbells tested WiFi connect, video quality, sounds quality, chime connect, ,motion detection,Night mode ....etc.

Q: Is the doorbell support Intercom?

A: Yes, it support 2CH Intercom. No matter where you are, people near the door can speak with you if your phone has wifi or 4G signal.

Q: If the battery power run out, How can I do?