Professional Tree Climbing Arborist Retriever Ball Rope Guide Ring Friction Saver Tool Outdoor Gardening Equipment

Professional Tree Climbing Arborist Retriever Ball Rope Guide Ring Friction Saver Tool Outdoor Gardening Equipment Specification: Material: Plastic Diameter: 27mm/1.06in Colour: Black Weight: 15g Scope of application: tree climbing Use steps: Step 1: Tie the rope-throwing bag to the tow rope, pass it through the big ring, and throw it over the treetops. Step 2: After unlocking the rope throwing bag, use the tow rope to pass through the small loop and then tie the rope thrower again and pull down the rope. Step 3: Pull down the rope. Throwing the rope bag will drive the small ring up. Step 4: The rope-throwing bag drives the small loop through the treetops and the tree-climbing belt has been hung on the treetops. Put down the rope-throwing bag at this time. Step 5: Untie the rope-throwing bag, tie the main rope with a tow rope as shown in the figure, and then pull it up, allowing the main rope to pass through the large and small loops. Step 6: After the main rope passes through the large and small loops, fix one end of the rope, and you can operate on the rope at this time. Step 7: After use, tie the climbing ball and the traction rope with the main rope, and pull down the main rope. Step 8: The tree climbing ball will pass through the big ring and then bring down the sling ring. Step 9: Pull down the main rope with one hand and hold the traction rope with the other hand to prevent the sling loop from falling down and hurting people due to gravity. Step 10: Remove the sling ring and tree climbing ball. Step 11: Pull down the traction rope and place it in the rope frame. The operation is complete. Note: Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you! Please allow 1-2cm measuring deviation due to manual measurement.  1 X Balls Rope Guide Ring