Compatible with t sprayer, Fence t sprayer with 3 spraying modes, Handheld t spray for fence, wall, ceiling, home ting (2x 1500mAh batteries, 1x21V charger, 2x800ml t buckets)

【3 Spraying Modes and 5 Nozzle Sizes】The electric t spray is equipped with 5 sizes of nozzles (1.0mm, 1.5mm, 1.8mm, 2.5mm, 2.7mm - already installed on the machine, 3.0mm) to meet different needs Requirements Spraying requires items. 1.0mm is suitable for atomized spraying of water-based disinfectants. 1.5mm and 1.8mm are suitable for high atomization spraying of t, topcoat, repair t, etc. 2.5mm and 2.7mm are suitable for primer spraying, latex t and other coatings. It can be adjusted to three different spray modes: horizontal, vertical, and circular, suitable for a variety of application scenarios.

【180W & 2x800ML Container】Our t sprayer is a brushless motor with 850W power, 2x800ml container, aluminum bucket and anti-corrosion plastic bucket to enhance atomization and reduce overspray. Dual adjustable spray flow, trigger control + flow control knob with adjustable valve knob lets you control t flow for precise spraying.

【HVLP Spray 】Our fence t sprayer adopts HVLP spray technology, the powerful low-pressure spray uses compressed air to spray more t onto the target surface, reducing material consumption caused by overspray and air pollution.

[Wide application] It has the best color distance (30-40CM), the maximum spray flow rate can reach 1000 ml/minute, and the maximum t viscosity is 60DIN/second. Electric spray s are suitable for household ting projects such as auto parts, home appliance parts, steel furniture, and wood products.

【What you will get】1* t sprayer, 2* 800ml spray container, 2*1500mAh , 1*21V charger, 5* nozzle, 2* t filter, 2* funnel, 1* nozzle cleaning , 1* Cleaning Brush, 1* User Manual. If you have any questions, please contact us through your order, you will get a reply within 24/7, our technical team and after-sales team are always behind you.

Product specifications:

Material: ABS material + metal

Nozzle material: nylon

Nozzles: 1x 1.0mm nozzle, 1x 1.5mm nozzle, 1x1.8mm nozzle, 1x2.5mm nozzle, 1x2.7mm nozzle

Power: 550W

Capacity: 800ml

Maximum flow: 1000ML/MIN

Maximum viscosity: 60DIN/SEC

Best spray distance: 30-40CM

(Keep the distance between the spray and the spray surface perpendicular to the spray surface about 3 to 20 cm, and move it at a constant speed.)

notes:

1. Unsuitable ts: alkaline, acidic ts, high viscosity ts.

2. t dripping: Please check whether the sealing ring is installed correctly, whether the nozzle is tight, and whether the container is tight.

3. Poor spraying: Please check whether the viscosity of the material is too high, whether the flow regulator is set too high, whether the nozzle is blocked, and whether the nozzle size is appropriate.

4. After use, the should be placed flat and not turned upside down.

5. Do not release the trigger during use.

6. Do not spray vertically.

7. After spraying, the t must be cleaned in time to avoid drying. This will clog the nozzle for later use and extend its life.