Product description
1. This tool is design for carver, engrave, rout, grind, sharpen, sand,polish, drill and more.
2. Unplug the tool form electrical outlet before loading a bit.
3. Press shaft lock button.Use the collet wrench to loosen the collet nut.Inset the bit (not included), and tighten the collet securely. But avoid
excess tightening of the collet nut and never use a damaged bit.
4. There is an ON/OFF switch. When the switch is on, the tool runs at 3,000 RPM. There is a switch indicator with an orange line on it.