Solar Tungsten Night Lamp Intelligent Motion Sensor Wall Lamp 3 Lighting Modes Waterproof Courtyard Garden Decoration Lantern

1. Advanced solar panels that absorb the sunlights and convert them into power. It charges during the day and automatically lights up at night.

2. Uses an upgraded built-in IC sensor to detect the brightness of the surrounding environment, automatically turning on at dusk and off at dawn.

3. It also has a PIR motion sensor that activates motion sensing within 19FT and a detection angle of 120 degrees. It automatically lights up when it senses movement at night and turns off after 15 seconds of no movement.

4. Perfect for outdoor scenes such as patios, gardens, yards, barns, garages, walls, and fences.

Specification:

Color: White / Black (optional)

Lamp body material: PC+ABS

Continuous lighting time: 6-12 hours

Protection class: IP65

Output power: 3.2V/3W

Switch Type: Manual

Solar panel specification: single crystal silicon 5.5V 1.43W

Button light mode:

1. ON: Turn on the switch, mode one, then press the switch mode two, then press the switch mode three, and then press the switch to turn off

2. 1st gear: The manned light illuminates for 15 to 30 seconds, and then the unmanned light goes out;

3. 2nd gears: The manned light illuminates strong light for 15 to 30 seconds, and then the unmanned light always illuminates weak light;

4. 3rd gears: manned, low light always on.

Note:

1. Please allow a little size errors due to manual measurement.

2. Before using, you should remove the protective film on the surface of the solar light. After a long time of use, the surface of the solar lamp will generally accumulate stains, so in your daily life, you should regularly clean the surface of the solar lamp, so as to ensure that the charging of the solar lamp can reach the best.

3. When you use solar lights for the first time, the batteries of solar lights are usually not charged, so after receiving the product, let the batteries be irradiated in the sun for more than 5 hours.

4. Do not install the solar light in the surrounding places with light sources, because these light sources will cause the solar light to automatically shut down phenomenon, affecting the normal use of the solar light.

5. Please make sure the solar panel can be exposed to the sun during the day, otherwise it will affect the charging efficiency, confirm the integrity of the solar panel before installation to avoid damage, the solar energy needs to be tilted at an angle of 30 degrees towards the south direction when installing.