Motorcycle electric seat three-speed temperature control heating thermal pedal seat cover waterproof sun protection thickened cushion

【 Product advantage 】 :

(1) Intelligent heating three temperature control, the use of intelligent heating, heating fast, wide temperature control, finger press the switch, can adjust the temperature

(2) Anti-slip and wear-resistant stability, cross-belt design, increase anti-slip, reduce product wear fixed more firmly

(3) Composite fiber heating body, using large area heating material, intelligent temperature control design; Thickened to keep warm and cold below zero, double fabric + heating fiber lock the temperature without fear of cold

(4) Leather waterproof four seasons, leather waterproof cushion can be heated in winter

Specifications:

Input voltage: DC12V

[Output power] : 10W

[Product line length] : 135cm

[Product material] : Upper fabric of heating cushion [PVC leather] Bottom composite fabric [Microfiber +TPU+ sponge + base cloth]

[Product content] : Seat cushion, power wiring, fuse, manual, cable tie *3

[Product scope] : Can be installed on motorcycles, 12V electric vehicles for use

[Wiring method] : red connected to the positive electrode, black connected to the negative electrode, ACC line connected to the electric door lock (connected to the reverse light is not bright, only heat)

[Product power value] : First class (red) : 100%, second gear (blue) 70%, third gear (green) : 40% (the above data are obtained from the experiment, the specific value or due to changes in objective factors such as voltage, environment slightly float, for reference only)

【 Switch operation instructions 】 :

1, power on/off: (turn on the power) long press the power switch, the switch itself will light up red, power on; (Turn off the power supply) Long press the lit power switch, the switch is off, and the power is off

2, temperature adjustment: after the power supply, red, blue and green alternately blink the quality control switch, long press the switch for 3 seconds to turn on, the switch lights up red, stabs for 5 minutes, the temperature under this state is set to the highest level, 5 minutes later automatically changed to the middle (blue), each time when the switch is pressed, high (red) - medium (blue) - low (green)

Package includes: 1* motorcycle heated seat cushion

[Special Attention] :

[1] Do not kneel on the seat or make the seat bear a concentrated load, so as not to damage the heating element of the motorcycle seat heating pad

[2] The motorcycle heating pad can only be opened when the engine is running, which can greatly reduce the consumption of capacity

[3] When wearing this product series, the degree of warmth (body temperature) brought by the heating pad depends on the external air temperature. The perceived temperature of indoor use is different from that of outdoor ride

[4] If a large amount of electrical equipment is installed, the power consumption will exceed the output of the alternator, which may cause the level to rise. If the near voltage of the is lower than 12.6V when idling during engine start, measures such as reducing electrical equipment should be taken. Check the periodically