Product description
XZZ ITE Burning Programmer for Macbook Lenovo Intel Laptop ITE85XX ITE83XX IT8390 EC No Disassembly Read/Write Chip Tool
Use three DuPont cables to connect the SM bus on the motherboard battery holder to any ground (no connection required for power supply)
Use type-c cable to connect computer and programmer.
Turn on the motherboard (3V motherboard can be made normally).
Software pop-up \ "Please turn on ITEEC Power!" error, this is not recognized chip error, click "OK" (if the error continues to report, check whether the wire is welded)
When the software icon lights up, click “type-auto” to recognize the chip.
Click Internal -- Flash at the top.
Click read chip, then click Save to save the file
Write chip process (The first six steps are the same as the read chip process):
Use three DuPont cables to connect the SM bus on the motherboard battery holder to any ground (no need to connect for power supply).
Use a type-c cable to connect the computer to the programmer.
Turn on the motherboard (3V can be output normally).
Software pop-up \ "Please turn on ITEEC Power!" error, this is not recognized chip error, click "OK" (if the error continues to report, check whether the wire is welded)
When the software icon lights up, click “type-auto” to recognize the chip.
Click "Internal -- Flash" at the top.
Make sure all four options are checked
The Lenovo Intel platform and all ECs connected to the BIOS do not require writing new programs. You just need to clean the EC. How to do it: when writing, you just need to check the first option below.
Casual Lenovo Intel Platform and all ECs connected to the BIOS no need to write new programs you just need to clean the EC. How to do it: While writing, Check the first option below
Itel s23,ite,itel cellphone,read write inc,iphone battery read write,bank card reader and write,ecu read write via obd,eeprom write read,edc17 write read,ite programmer 128 adapter,sio ite chip programmerite,8227eprogrammer,ite 8987vg ec programmer chip programmer ite
Chip writing process (The first six steps and consistent chip reading process) 1. Use three DuPont cables to connect the SM bus on the motherboard battery holder to one ground (the power supply does not need to be connected). 2. Use type-c cable to connect computer and programmer. 3 for motherboard power (requires 3V motherboard can be made normally). 4. The software appears in the following error, which is not recognized chip error, click "OK (if the error continues to check whether the cable is welded).
![Product Introduction of XZZ ITE Burning Programmer for Macbook Lenovo Intel Laptop ITE85XX ITE83XX IT8390 EC no disassembly read/write al Chip 29]()
Operation flow Chip read process 1 use three DuPont cables to connect the motherboard battery handle on the SM bus and each ground (the power supply does not need to be connected) 2. Use a type-c cable to connect the computer and the programmer 3. Turn on the motherboard (3V can be made normally ). Click OK 4. The software appears in the following error, which is not recognized chip error, (if the error continues to check whether the cable is welded). 5. When the software icon lights up, click "type-auto" to recognize the chip. 6. Click "internal-flash" at the top. 7. Click read to read about new products. 8. Click "Save" to save the file.
Software setup Follow the above diagram to setup, click "OK" and click "set up' in the menu bar.
Introduction to software displays Recognizes software function keys.
EC Programmer Instructions Programmer appearance introduction Release Programmer function key indication
Can be implanted into the EC series produced by ITE The ITE85XXI TE83XX series is basically supported.