Arc pulse DC 1000KV pulse inverter generator ignition coil module electric shock high voltage package

Description:

Description:   

Specification:

Module type: MC-901

Input voltage: 3.7V-7.4V

Input current: 0.5A-1A

Input wire length: 9 cm

High voltage type: Pulse DC type

Output voltage: 800KV-1000KV (please pay attention to safety when using)

Output current: 0.5A-1A

Output length: about 16 cm

High voltage bipolar discharge distance: 1.5 cm-2 cm

The power of the module is large, and the internal heat dissipation is not suitable, so it cannot work for a long time, and the working time of the power must be controlled within (5) seconds, and intermittent discharge must be taken. Beyond the fragile to break! Regret no way!

Ordinary dry batteries have been tested to have no capacity and cannot drive the module to work, so it is recommended to use 18650 lithium batteries

Size: 88x26mm (LXD)

 

Instructions for using the module:

1. The high-voltage module should avoid using high-voltage no-load, and must be energized before the high-voltage line is adjusted to the correct distance, and the high-voltage line pulling distance is proportional to the use voltage and capacity of the battery

2. When the arc distance of the test is from short to long, it is forbidden for the power supply to exceed the longest arc distance, because the high-voltage energy cannot be released, it is very easy to damage the module.

3. The power supply of the module, the internal heating is not hot, so the working time is not long.