ITGZ M.2 NVME SSD RAID Dual Bay HDD Solid State Case Hard Disk Box Array Mobile Hard Drive Enclosure TYPE-C USB3.2 GEN2X2 20Gbps

M2. NVME dual bay

The array reads 4 RAID modes

High-speed transfer of USB3.2 GEN2 20Gbps

Specification:

Transfer interface: USB2.0, USB3.0, USB3.1, USB3.2, USB4

Transmission speed: 20Gbps

Main control: JMS586R

Type-C power interface: conventional TYPE-C mobile phone charger and computer charger can be used

P1&P2 SSD indicator: The green light is lit when the SSD recognition is normal, and the green light flashes when reading and writing data. When the SSD fails, the red light flashes.

RAID mode setting steps:

1. Install the SSD, plug in the data cable and power cable, and the power is turned off.

2. Dial the RAID mode gear to the desired position

3. Press and hold the "RESET" button, then turn on the power switch, and release the "RESET" after hearing the "drop" sound for three seconds.

4. After the RAID setting is completed, you need to enter Disk Manager for initialization.

Note: Switch RAID mode, data will be lost, please be cautious.

Recommendation: Before switching RAID mode, back up data.

size: 10.9 x 7.1 x 1.3cm

Material: Aluminum alloy

colour: grey

Package Contents:

1 x hard drive enclosure

1 x USB A to USB C cable

1 x USB C to USB C cable

1 x USB A to USB C adapter

1 x USB C to USB A adapter

1 x screwdriver

8 x heat sinks pad

Only the above package content, other products are not included.