[Flekratiy] Suction Pump Transfer Pump Hand Pump Oil Gasoline Water Transfer Pump

It is light and practical, especially if you take one when you travel a long distance. It is very practical and convenient and it is prepared.

Unique new appearance, new elastic plastic precision art, more beautiful and durable.

As long as the liquid can be sucked in by air pumps, this is very convenient, so that all the liquid can be drawn out without leaving liquid waste in the container.

The ideal companion for lawn mowers, brush cutters, hedge trimmers and other small gasoline-powered tools. You do not have to queue at the gas station with an iron bucket to buy gasoline. With just a few pumps, you can pump gasoline from the car into the lawnmower. .

Oil pumps. Pumps two in one.

Use:

Pumping oil from a car into a tank, pumping oil togasoline from a tank, pumping gasoline from one car to another.

Instructions:

First insert the upper tube into the desired liquid, then put the lower red tube into another container (if not enough, a black extension tube is ready), and then gently pull a few times with the left lever on the liquid It is easily extracted.

Specifications

Material: plastic

Color: Red

Pump cylinder capacity: 200cc

Inner diameter of hose: 8mm

Outer diameter of hose: 12 mm

Suction tube length: 130cm

Length of oil drain pipe: 130 cm

Length of extension tube: 120 cm

Inner diameter of extension tube: 3 mm

Exterior diameter of extension tube: 5 mm

Flow rate: 5L min

Package List

1set Pumping unit

Notes

1.Please do not pull the lever too often, as long as the liquid flows, you can stop pulling.

2. Drain the fuel after each fuel pump.

3.After use, it is best to pump a few oils or drip a few drops of oil from the inlet to clean the pipe wall.

4.During the oil suction process, try to keep the oil outlet of the oil absorber lower than the oil inlet, so that after the oil is sucked off, you can stop pumping and the oil will continue to drain automatically.

5.After each pumping and cleaning of gasoline, spray a small amount of engine oil into the oil inlet of the pump cylinder to maintain lubrication between the suction cylinder and the rubber ring for next use. This can effectively prevent the oil screw from wearing out and the oil suction extends the service life of the device.

6.This product is not suitable for pumping lubricating oil or other viscous semi-liquid liquids.