M.2 B+M Single-Port 10GbE Network Card RJ45 Ethernet Network Adapter AQC107 Industrial Control Grade Server Network Card

Marvell AQC107 controller has Base-T copper network interface, supports 10GBASE-T/5GBASE-T/2.5GBASE-T/1000BASE-T /100BASE-T and PCIe Gen3x4 or Gen2x4, AQtion Ethernet controller can easily handle 10GbE lines speed performance.

The AQC107 incorporates Aquantia's AQrate® PHY technology to deliver 10GbE networking speeds over Cat 6a and 5 GbE and 2.5 GbE networking speeds over 100 meters of Cat 5e or better cable, enabling higher data rates , with zero changes to conventional wiring.

Designed for: Any mobile device, desktop, workstation, value server or industrial design with strict space constraints. System Requirements:- Win 7/ Win 8/Win 8.1/Win 10/Server 2012/ Server 2016 32 or 64bits, Linux Kernels3.10 and above, available M.2 B+M KEY slot.

Compliant with PCIE Express Revision 3.0 and downstream PCI Express Reivison2.0. Each line supports 8.0GT/s and 5.0GT/s line speed. Support Gen3 x4 or Gen2 x4. Support communication and management functions. Integrated Aquantia AQrate PHY with NBASE-T Technology. Support PHY specification through 10GBASE-T /5GBASE-T /2.5GBASE-T /1000BASE-T /100BASE-T.

On-chip high-resolution cable analyzer for advanced cable diagnostics

Energy Efficient Ethernet (EEE) support

Support IEEE1588v2 precision time protocol

Supports large send offload, receiver scaling (RSS), direct cache access (DCA) and headers

Checksumming improves network performance and reduces host CPU utilization

Wake-on-LAN (WoL) power management

Supports IPv4, IPv6 and IPv6/UDP checksum offload

Supports jumbo frames (up to 16kbytes)

Quality of Service (QoS)

Supports up to eight traffic classes and Data Center Bridging (DCB)

Chip processor:Marvell/AQC107

Applicable network:10GbR server network card

Main controller:Marvell AQC107

Bus type:M.2 B+M KEY

Media interface:1 x RJ45 copper cable

Transmission rate:10G/5G/2.5G/1000/100Mbps

Network topology:10GBASE-T / 5GBASE-T / 2.5GBASE-T / 1000BASE-T / 100BASE-T

IEEE 802.3bz, IEEE 802.3, IEEE 802.3x, IEEE 1588, IEEE 802.3az

-Energy Efficient Ethernet (EEE)

Management functions:IPMI pass-through via SMBus or NC-SI, iSCSI boot, WoL, PXE remote boot, VLAN filtering

Firmware environment:

Operating temperature:0 - 55°C (32 - 131°F)

Storage temperature:-40 - 70 ℃ (-40 - 158 ℉)

Storage humidity:90% non-condensing relative humidity at 35°C

Colour:Green

Material:PCB

Please note: Installation method Reference picture

Package Contents:

1 x Network Card

1 x CD

1 x Short Iron Piece

Only the above package content, other products are not included.