About this product
Heater Wattage5-10W
Voltage5V
MagneticNo
Built-in BatteryNo
Batteries IncludedNo
Plug Typeusb
Warranty TypeSupplier Warranty
Product description
Mini heating rod for fish tank
matters needing attention:
1. The heating rod must be completely immersed in water when in use.
2. Please do not touch the heating rod when it is operating normally.
How to choose a heating rod:
Please calculate according to the size of the fish tank.
Fish tank volume=length x width x net height of water level: 1000=? Typically, 1L of water is used, paired with a 1.5-2W heating rod,
Similarly, for example: length 15x width 15x water level net height 12-1000=2.7 liters of water, then a corresponding heating rod of 5/10w can be selected.
Is the heating rod election small?
Choose the size of the heating rod according to your fish tank to avoid secondary purchases. For example, a 5w heating requires 2 hours,
So a 10W battery may only take one hour. If you don't save enough electricity with a 5W battery, you may not be able to heat it up.
What is the temperature of the heating rod?
5W can increase the water temperature by 5-8 ° C, and 10W can increase the water temperature by 8-12 ° C (10W has better heating ability, recommended for low-temperature areas),
What is the appropriate size for a fish tank?
It is recommended that the diameter or length of the 5W cylinder be within 10CM.
The recommended diameter or length for a 10W cylinder is within 15CM (best for small desktop cylinders),
Is this heating rod suitable for fish farming or turtle farming?
Suitable for fish tanks, not suitable for turtle tanks (turtle tanks have a wide water surface and cannot be heated evenly)
What is the applicable water capacity?
5W is suitable for fish tanks with 500ML-2 liters of water, and 10W is suitable for fish tanks with 1-3 liters of water.
Important things are to be repeated for 3 times:
USB power supply (requires configuring a 5V2A plug by oneself)
USB power supply (requires configuring a 5V2A plug by oneself)
USB power supply (requires configuring a 5V2A plug by oneself)