Product description
ESP-12E Motor Drive Expansion Board
Motor Drive ESP-12E Developed Based on Expansion Board.
L Esp12 Dev Kit Development Board Extension Module;
L Leads to All Functional Pins of Esp12 Dev Kit: SPI,UART,GPIO,AI and 3.3V Power Interface;
L Expand Two-Way Motor Drive, Which Can Directly Drive Two-Way Motor;
L Motor Power Supply Range: 4.5V ~ 36V;
L Control Power Supply Range: 4.5V ~ 9V;
L Motor Power Supply, Control Power Supply Separation; in the Experiment, Vin and VM Can Be Shorted by Short Circuit Block Combination, and Power Supply to Motor and Control Board at the Same Time.
•Power Input: ~ Motor Power Supply (VM):4.5V ~ 36V, Which Can Be Supplied Separately; ~ Control Power Supply (VIN):4.5V ~ 9V (10vmax), Which Can Be Supplied Separately; ~ Module Provides Short Circuit (Short Circuit VM and Vin), Which Can Conveniently Use One Power Supply (Must Be 4.5V ~ 9V) and Complete the Drive and Control of the Motor at the Same Time;
•Logical Work Current Iss:≤ 60ma (VI = L),≤ 22ma (VI = H);
•Driver Part Work Current IO: ≤ 1.2A;
•Dissipation Power: 4W(T = 90℃)
•Control Signal Input Level: High Level: 2.3V ≤ VIH ≤ Vin; Low Level:-0.3V ≤ Vil ≤ 1.5V
•Operating Temperature:-25℃ ~ + 125℃
•Drive Form: Dual High-Power H-Bridge Drive
•Esp12e Dev Kit Control Ports: D1,D3 (a Motor);D2,D4(B Motor)
•Module Weight: about 20G
L When Inserting the ESP-12E Module, Please Note That the Antenna Direction Is the Same as the Expansion Board Direction;
L Use the Short Circuit Module to Supply Power to the Control Panel and the Motor at the Same Time.