Search
S$4.55
S$5.69-20%
Electronic module Attiny88 Development Board Module Digispark Expansion Board Compatible with Nano V3.0 Improvement Board
Sold by KIN-SG
Select options
Select
Shipping
From S$1.49
Est. delivery by Apr 28 - May 1
KIN-SG
1,360 items
Product description
MH-ET Live Attiny88 (16.0MHz) Microcontroller Development Board Is Similar to Arduino Series Development Board, but It Is More Cost-Effective, Smaller in Size and More Powerful in Function. Because It Can Use the Familiar Arduino IDE,MH-ET Live Tiny88 Is a Development Board That Can Quickly Get Started with DIY Electronic Products, Which Can Well Replace Other Development Boards with Too Large Volume and Too Complicated Assembly.
MH-ET When Live Attiny88 Leaves the Factory, in Addition to the Pin Header Included, Other Components Have Been Completely Assembled, and Welding Is Also Convenient and Simple.
Specifications:
SupportArduino IDE 1.0+(OSX / Win / Linux)
Powered by USB Or External Power Supply 5V Or 7-24v (Recommend 12V Or Lower, Automatic Selection)
On-Board 500mA 5V Voltage Regulator
Built-in USB
26 One I / O Pin (Only When Your Program Actively Communicates Via USB, 2 One Is Used for USB, Otherwise It Is
Allows You to Use All 26 One after Programming through USB)
8K Flash Memory (about 6K after Boot Program)
On-Board I2C and SPI Interfaces
With 26 One PWM Pins (Software PWM, Hardware PWM Only Two (D9,D10))
With 8 One ADC Pins
Power Led and Test/Status Led
Volume (mm):44.5x18.3x3
Installation and Test Steps of Development Board:
2. Go to the Tools Menu and Select Board Submenu-Select Board Manager, and Then Select Contribution from the Type Drop-down Menu ": select the MH-ET Live Boards Package and Click Install;
3. the USB Driver Can Also Be Downloaded in the Supporting File. the Connection Is as Follows: https://pan.baidu.com/s/1HOl8jHOrK3TP0gvOtIYoqQ
4. When Downloading the Program, Do Not Connect the Module First. When the Prompt of Inserting the Module Appears after Compilation, Plug It in Again and Wait for the Automatic Download to Complete;
5. You Can Select the Example Provided by the Arduino IDE: Select the Development Board as MH-ET Live Tiny88 in the Toolbar, and Open the Program in the File>> Example>>Basic>>Blink, change Port 13 in the Program to Port 0, Compile and Download It into Tiny88 Development Board According to the above Method. It Can Be Seen That the on-Board LED Lights Flash According to the Frequency Specified by the Program.
Explore more from KIN-SG
No more products
Open TikTok