Electronic module High Power 600W MOS Tube Trigger Switch Driver Module PWM Adjustment Electronic Switch Control Panel 4v-60v

1. This Module Supports High Level Trigger, Low Level Trigger, Switching Value Control and PWM Control;

2. Adopt Original Imported Dual MOS Parallel Active Output, Lower Internal Resistance, Larger Current, Strong Power, 10, 600W at Normal Temperature, Meeting the Use of Most Equipment;

3. Support Ultra-Wide Voltage: DC 4V ~ 60V;

1. at the Same Time, Only One Signal Can Be Used to Control This Module, and Two Or More Signals Cannot Be Used to Control This Module at the Same Time;

2. High Level Trigger Voltage Range: Dc3.0v ~ 24V, That Is, When the Signal Is 3.0V ~ 24V,MOS Tube Conduction, Less than 0.6V, That Is, 0V ~ 0.6V,MOS Tube off, the Signal Voltage Must Not Be between 0.6V and 3.0V, So MOS Is in the Incomplete Open State, and High-Power Use Burns MOS;

3. Low Level Trigger Voltage Range: DC 0V ~ 0.6V, That Is, When the Signal Voltage Is 0V ~ 0.6V,MOS Tube Conduction, Higher than 3.0V,MOS Tube off, the Signal Voltage Must Not Be between 0.6V ~ 3.0V, in That Way, MOS Is Not Fully Open, and High-Power Usage Burns MOS.

Product Parameters and Applications:

1: Working Voltage: DC 4v--60v;

2: Trigger Signal Source: High Level Trigger (DC3.0V--24V), Low Level Trigger (DC 0.0v ~ 0.6V), Switch Value Control, Can Be Connected to Single Chip Computer IO Port, PLC Interface, DC Power Supply, Etc, the PWM Signal Can Be Connected, and the Signal Frequency Is 0-2.5KHz.

3: Output Capability: DC 4v--60v, Continuous Current at Normal Temperature 10, Power 600W! Under the Condition of Auxiliary Heat Dissipation, the Current Can Reach 15A.

4: Application: the Output Can Control High-Power Equipment, Motor, Bulb, LED Light Strip, DC Motor, Micro Water Pump, Solenoid Valve, Etc., Can Input PWM, Control Motor Speed, Lamp Brightness, Etc.