Product description
Mc34063a Boost Module Battery Boost Module
Boost Module Mc34063a _Boost Is a Small Boost Module Based on Chip Mc34063a, Which Can Raise the Low Voltage to a Certain Range of High Voltage and Adjust the Output Voltage through Potentiometer. It Can Be Used in Some Places Where the Voltage Needs to Be Increased.
1. Input Low Voltage, Output High Voltage, Realize Boost Function.
2. Adjustable Output Voltage.
4. the Module Is Small, Easy to Carry and Use in Various Occasions.
1. Input Voltage Range: 3. 6v-30v.
2. Output Voltage Range, Output Voltage 3.8V to 36V. Output Voltage Regulation Characteristics: Load Regulation Rate Less than 5%.
3. The IC Internal Switch Tube of This Module Is 1.5a, but for the Consideration of Safety and Calorific Value, Recommend the Load Power Consumption of This Module Is Less than 0.8W. That Is, When the Output Is 5V, the Load Is Within 160ma.
Note: The Higher the Negative Pressure Output, the Load Capacity Will Decrease Relatively.
1. Vin: Input Low Voltage.
3. out: Output the Increased Voltage.
Operating Instructions: Connect the Working Voltage to VCC and GND, and Do Not Reverse to Avoid Damage to Boards and Devices. The Output Voltage Can Be Controlled by Adjusting Potentiometer. The Input and Output Pins Need to Be Connected to the Ground with a Electrolytic Capacitor of More than 100UF. Filter Capacitor of the Input and Output Is the Positive Pole Connected to the Input Foot, and the Negative Pole Is Grounded. The Withstand Voltage of the Capacitor Must Be Greater than the Input and Output Voltage.