Langley Multifunction Watch Tool Fix Kit Pin Set Watch Case Opener Bracelet Link Repair Tool Remover Screwdriver Tweezer For Watchmaker maintenance tools watch repair tool kit adjustable rear lid bottle opener

The following is the picture and text (English) information:

Name of commodity:Three-claw opener 1. Adjust the three-jaw opener to the appropriate size with the back cover of the watch; 2. Place the claw in the groove of the back cover; 3. Turn the handle with appropriate force to open the rear cover.

Name of commodity:Remove the watch strap 1. Adjust the detachable wristwatch strap to the maximum size; 2. Place the connection shaft to be unloaded next to the thimble; 3. Then, turn the handle to push the thimble forward against the connecting shaft.

Name of commodity:Stabilizer 1. Adjust the stabilizer to the maximum size first; 2. Put the watch back on the stabilizer. 3. Properly tighten the valve to the proper size.

Name of commodity:Small hammer punching needle base 1. Place the watch in the card slot of the base; 2. Place the top of the punching needle on the needle on the watchband. 3. Use a small hammer to strike the punching needle and push the needle on the table below.

Due to different light sources and screen configurations, the project color may be slightly different from the image. Please allow slight size difference due to different manual measurements.

Hello, thank you for coming to our shop to purchase. If you are satisfied with our goods and services, please give us a 5-star praise for our goods and services. Thank you for your support, we will give you better service and look forward to cooperating with you again. If you have any suggestions on our goods and services, we also hope that you can contact our customer service and we will be close to fully helping you. We will accept your suggestions at any time. Thank you

Trendy and fashionable watch accessories