Micro 310 BLDC Brushless Motor DC 12V 17.4V 24V 8600RPM High Speed long Shaft mute Built-in Driver Support PWM Speed regulation

The brushless DC motor has a drive board. The positive and negative poles cannot be reversed. The red wire is connected to the positive pole and the black wire is connected to the negative pole. If connected reversely, the drive board will be burnt out.

Specification:

Motor diameter: 24.2MM (310 motor)

Motor shaft diameter: 2.0MM(Worm outer diameter 10.5mm)

Motor height: 19.1MM

Length of output shaft: 21.5MM

Red line: positive

Black line: negative

White wire: connect with black wire

Weight: 30g

------------------

Voltage: DC12V     No-load current:56mA      No-load speed: 3800RPM

Voltage: DC18V     No-load current:60mA      No-load speed: 6200RPM

Voltage: DC24V     No-load current:65mA      No-load speed: 8600RPM

------------------

The actual measurement is to input the PWM signal under the DC24V voltage (the pulse frequency is adjusted at 10000HZ), and the data of the duty cycle to control the speed is as follows:

90%   700RPM

80%   1450RPM

70%   2300RPM

60%   3200RPM

50%   4100RPM

40%   5000RPM

30%   9850RPM

20%   7000RPM

10%   7600RPM

0%    8600RPM

---------------------------------------------------------------------

Note: For brushless DC motors, it is strictly forbidden to connect the positive and negative poles wrongly. The red wire is connected to the positive pole, and the black wire is connected to the negative pole. If the reverse connection is made, the driver board will be burned.