HABOTEST HT116 Smart Digital Multimeter 1000V AC/DC 10000 Counts True RMS NCV Voltmeter Ammeter Mulitiple Tester HT89 Contact & Non-Contact 300V Backlight Flashlight Sensitivity Adjustable AC Voltage Tester

•Full Function Multimeter: the professional multimeter has various useful functions for measuring DC/AC voltage, DC/AC current, resistance, capacitance, frequency/duty, temperature, and diode test, continuity test, non-contact AC voltage detection, live wire detecting.

•Temperature Measurement: -40~1000°C/-40~1832°F wide test range, use the included K-type thermocouple probe to test the temperature of the target object, °C/°F unit switchable.

•Smart(AUTO) Measurement: this measurement mode is default when power on. In this mode, DC/AC voltage, resistance, continuity can be measured, and the meter can automatically identify the measurement signal.

•Max/Min & Relative Value Measurement: under the manual range mode, it can measure the maximum and minimum value(invalid in capacitance, frequency/duty cycle, temperature, NCV/live gear), and relative value(invalid in continuity, frequency/duty cycle, temperature, NCV/live).

•Flashlight & Data Hold: auxiliary light up the working areas under the low lit conditions, and you can press the data hold button to keep the measured value unchanged to write it down leisured.

•Low Consumption & Auto-off: powered by 3pcs 1.5V AAA batteries(not included), and if there is no operation in about 15 minutes, the tester will automatically shut down to save battery.

•AC Voltage Detection: AC voltage range of 12~300V. Detect the AC voltage and distinguish the neutral-live wire according to the voltage.

•Sound and Light Dual Alarm: When measuring voltage, display screen and buzzer double prompt.

•Flashlight: LED light function provides light in dark environments.

•Wire Conduction Function: If the wire is connected normally , the "--C" buzzer will be displayed. If the wire is open, the electroprobe will not respond.

•Auto Power Off: After about 5 minutes without any operation and no signal detection, the voltage detector will be automatically shut down to extend the battery life.

•Inductive Mode Measuring: When the probe of the test pen is placed close to the AC voltage source, the buzzer sounds. With this function, you can distinguish between zero and live wires, or find the break point of the wire.