2.5G USB 3.1 Ethernet Adapter - High-Speed USB Network Adapters for PC Laptop - Dual USB-A/USB-C to 2.5Gbps RJ45, Compatible with Windows, Mac OS, Linux, Plug and Play

[Upgrade your existing Ethernet port] USB 3.0 to 2. 5Gbps Ethernet adapter is an easy to use solution to quickly upgrade your current RJ-45 LAN port to 2. 5Gbps.

Meet the requirements to get 2.5G Ethernet: 1), downloaded the drivers from Realtek offical site (chip: RTL8156B); 2), check if your Network card and your Router can support 2.5G Ethernet or not; 3), make sure to connect Cat 6 or above lan cable to the Router.

[Capacity]Supports 10M/ 100M/ 1000M (1G)/ 2500M (2.5G) bandwidth, twisted pair crossover detection and auto-correction (auto MDIX) ; support WOL (Wake-On-LAN), Full Duplex flow (FDX) (10M/100M/1G/2.5G Rate), auto-negotiation and back pressure routing. Backwards compatible with USB 1.0, USB 1.1, USB bus powered, no external power supply required

[Compatibility]Built-in with Realtek IC chip, drivers needed before get it to work, plug and play after one time driver installation;

Product Feature

Chipset;RTL8156B

Port number;1* RJ45

Material:Aluminum

The RTL8156B(S) offers high-speed transmission over CAT 5e UTP cable or CAT 3 UTP (10Mbps only) cable. Functions such as Crossover Detection and Auto-Correction, polarity correction, MDI swap, adaptive equalization, cross-talk cancellation, echo cancellation, timing recovery, RFI protection, thermal management, loopback diagnostic capability, and error correction are implemented to provide robust transmission and reception capabilities. The RTL8156B(S) features embedded One-Time-Programmable

One-Time-Programmable (OTP) memory that can replace the external EEPROM (93C46/93C56/93C66).

Standard;IEEE 802.3,IEEE 802.3u,IEEE 802.3ab,IEEE 802.3az,IEEE 802.3bz

Compatible with the IEEE 802.3u specification for 10/100Mbps Ethernet, the IEEE 802.3ab specification for 1000Mbps Ethernet, and the IEEE 802.3bz specification for 2500Mbps Ethernet.

Integrated 10M BASE-Te and 100/1000M/2.5G BASE-T IEEE 802.3 compatible transceiver

Supports 2.5G Lite (1G data rate) mode

Auto-Negotiation with Extended Next Page (XNP) capability

Compatible with NBASE-TTM Alliance PHY Specification

Compatible with IEEE 802.3, IEEE 802.3u, IEEE 802.3ab

Supports IEEE 802.1P Layer 2 Priority Encoding

Supports IEEE 802.1Q VLAN tagging

Supports IEEE 802.3az (Energy Efficient Ethernet)

Supports IEEE 802.3bz (2.5GBASE-T)

Supports Full Duplex flow control (IEEE 802.3x)

Compatible: Windows, macOS, Linux, and Chrome OS, USB-C (5Gbps), USB 3.0, and Thunderbolt 3 Systems, Microsoft Windows 10, 8.x, 7, Vista and XP, macOS 10.6 and above, iPadOS Linux kernel 3.2 and above (basic support, install driver or update to 5.x kernel for full support), Supported on up-to-date Chrome OS systems Plug and play for Windows 10, Mac OS 10.13.6 to 11.x, iPadOS, Linux Kernel 5.x and above, up-to-date Chrome OS

Not Compatible:ARM-based Windows RT and Windows Mobile, Nintendo Switch, Most Android devices, TiVo Series 2, Wii, or other non-PC/Mac platforms, Not recommended for use with FreeBSD or pfSense