About this product
Country of OriginMainland China
Warranty TypeNo
Product description
Installation method of small car sticker (dry sticker method):
1. Clean the body and keep it dry.
2. Determine the position that needs to be pasted. Under normal circumstances,
slowly paste it while scraping it flat with a tool and uncovering the backing paper.
3. If the graphics are really not large, you can also tear off all the stickers
and paste them again, but be careful not to accidentally stick.
4. After pasting, repeatedly scrape and press several times.
Remove the transparent transfer film
5. Use a craft knife to draw a knife on the car door and seam,
and wrap it inward with adhesive tape 6. Do not allow any separation
or protrusion between the car sticker and the body
2, Large car sticker installation method (wet sticker method):
Tools: cloth, sprinkler, scraper or credit card
1. Clean the car body and evenly sprinkle water on the
parts of the car body to be pasted to reduce the viscosity of the sticker
and facilitate adjustment of its position
2. Determine the location where you need to stick it. Slowly stick it on one side,
gently scrape it flat with a tool, and peel off the backing paper at the same time
3. When encountering door handles or anti scratch strips,
the material should be cut open and wrapped according to the situation
4. Adjust appropriately, confirm the general position of the graphic accurately,
and repeatedly scrape off water and bubbles with force
5. Use a craft knife to draw a knife on the car door and seam, and wrap it inward to fit
6. Do not allow any separation or protrusion between the car sticker and the body
7. Try to let the moisture in the car sticker dry completely,
and if possible, heat and dry it moderately.
Depending on the weather conditions, wash the car after one or two days