Product specifications: The height of the spray is between 30-50cm, and it may vary depending on the nozzle connection. The water pump will start within 3 seconds once the solar panel receives adequate sunlight. Instructions: 1) Follow the assembly diagram to put the product together. 2) Position the solar panel in an unobstructed area to allow for sufficient sunlight. The water pump will function properly when the solar panel receives enough light.
Upon initial placement of the water pump in the water, there may be air trapped inside, potentially impacting the spraying performance. It is advisable to allow the water pump to expel water normally before attaching the nozzle. Note: The water pump should be fully submerged in water and not left running dry for extended periods. When the water pump is first submerged, it is recommended to wait for it to expel water normally before inserting the nozzle.