AC motor 4000W imported high-power thyristor electronic voltage regulator dimming speed regulation temperature regulation 220V

Description:

Product name: 4000W AC voltage regulator

Thyristor model: BTA41600B

Size: L85*W55*H38mm, knob inner hole 6mm.

Maximum power: 4000W (resistive load limit power), power should be reduced for a long time. (Recommended load within 2000W power)

Efficiency: more than 90% Working voltage: AC 220V Regulating voltage: AC 10-220V Note that the load must be connected first and then the voltage is regulated.

Thyristors are mainly used for resistive loads (heating wires, incandescent lamps, etc.), most of the single-phase AC motors can also be, but it is not guaranteed, and other types of loads should be confirmed by the buyer. The fuse is not a panacea, there is a reaction time, and if the current is too high, in addition to blowing out the fuse, the module may also burn out.

Note that the plastic cover on the joint can not be completely lifted due to the installation of the shell, the screwdriver should be twisted on the side, and be careful when lifting, it is easy to break the cover if the force is too large, and the express transportation may also be crushed, which is a wearing part, but it will not affect the use of the module, and the store is not responsible for the return or exchange of plastic cover-related problems. Interior Pictures:

Voltage regulator size: length 85mm * width 55mm * height 35mm with shell and fuse The voltage regulator is safer and more convenient to install, and is more suitable for families and factories and enterprises that are inconvenient to install.

Use the original imported 41A thyristor. (No corners are cut in every product in our store)

The use of 1.6 thick FR-4 high-temperature resistant circuit board, the circuit design is reasonable, and the design of the thickened solder line is adopted, even if the large current passes, it is enough to deal with, and the use is safer and more reliable.

Regardless of the cost, the store uses a standard 35A 4-position binding post, so that it is a true 4000W design. (Two in and two out is more convenient for wiring).

The circuit has undergone many technical improvements, and each accessory has been selected, and it is now fully technologically mature. The dual-capacitor design (safety capacitor + metal film capacitor) can effectively absorb surges and voltage spikes, more effectively protect the thyristor, and use it more efficiently and safely.

Externally used 1.5 thick aluminum plate and stainless steel open die stamping forming, beautiful and generous, more suitable for home temperature regulation and industrial enterprises use! Beautiful and generous, safe, convenient, high-quality products, the general bare board regulator can be compared. No matter how long it is used, it will not rust and other appearance problems.