DC6-40V to 3.3V/5V/9V/12V/24V 3A DC adjustable step-down and regulated power supply module

Description:

Model: GACA0010

Color classification: fixed output 3.3V, fixed output 5V, fixed output 9V, fixed output 12V, fixed output 24V, adjustable output 2.5-26V

   

Features:

1. This product is a high-efficiency low-ripple step-down module, using the original chip, supporting 3A maximum output, and can continue 3A output.

2. The product has high efficiency, can be smaller in size, can achieve lower heating, and can continuously output higher current.

3. The module adopts low-resistance MOS, which has good performance, smaller voltage difference, low ripple ceramic capacitor plus electrolytic capacitor at 500KHZ frequency, and low ripple output of filter output.

4. Product design, materials, PCB process put a lot of effort, so that this module can achieve considerable parameters and functions in a very small volume.

5. High conversion efficiency, up to 95% conversion efficiency, up to 3A continuous output current or continuous 60W. Specifications:

Input voltage: 6V-40V (40V max)

Output voltage: 3.3V, 5V, 9V, 12V, 24V, 2.5-26 V adjustable

Differential voltage: The input and output need to have a differential voltage of 0.7V or more

Current output: 3A (maximum), can continuously output current 3A Power: 60W Quiescent current: 1mA Conversion efficiency: up to 95%

Frequency: 500KHZ frequency low ripple protection: output short circuit protection

Operating temperature: -40°C to +85°C Output indicator: with

Size: 40*19mm; BOARD THICKNESS 12.5 MM (POTENTIOMETER 14 MM), TWO-SCREW APERTURE 3.1 MM MODULE INTERFACE:

IN+: Input DC positive 6V-40V (higher than output 0.7V).

IN-: The input DC negative pole is connected with the output negative pole. OUT+: Output DC positive.

OUT-: The output DC negative is connected with the input negative electrode. Directions of use:

1. The module is very small in size, the heat dissipation area is limited, and it is normal for high power output to heat up, and we use good materials, so we don't have to worry about heating affecting the life.

2. The input and output voltage needs to have a differential voltage of 0.7V or more to achieve step-down.

Product List: 1X Module