About this product
- Optical Zoom:3x
- Digital Zoom:3x
- Memory Card Type:Micro SD
- Frame Rate:30fps
- Product Condition:New
- Input Voltage(V):5
- Plug Type:UK type
- With Maganet:No
- Battery in The Product:Yes
- With Battery:Yes
- Warranty Type:Manufacturer Warrenty
Product description
Features: Audio Alert, Audio Recording, Built-in Microphone, Built-in Speakers, Video Recording
4.3Inch 1080P Tuya Smart wifi Door Peepholes Camera Eye Video Doorbell
● Use microwave radar to detect the alarm, as long as someone is standing in the doorway, the alarm will be triggered.
● 1080P HD video doorbell camera with 4.3-inch display.
● Built-in 5000mAh rechargeable battery and 5V 1A USB cable power supply, with low battery alarm function.
● When someone stays at the door, the camera will capture and record the video at the same time,
you can view it in the playback (this function requires a memory card).
● One-way intercom, on the cell phone users can only hear the visitor's voice, can not directly communicate with the visitor.
● 1080P., clear night vision. Provide day and night monitoring.
● PIR Motion Detection. 120° Viewing Angle, APP will push notification when peephole camera detects a person's movement.
● Smart Playback. If you insert a TF card, you can view the video recordings in "Smart Life" or "Tuya Smart" at any time.
●Camera Viewing Angle: 120° wide angle
●Memory Card: max.128G (not included)
●Wifi Mode: 2.4G 802.11 b/g/n
●Applicable door thickness:35mm-115mm
●Applicable door aperture diameter:15mm-36mm
●The memory card format used for the doorbell is FAT, and the transmission rate needs to C10
●Charging interface: Type-c
●Charging cable length: 3m
●Power: Built-in rechargeable 5000mAh battery. APP real-time reminder, when the battery power is less than 5%,
the device will prompt the low power, APP can't link the device when the power is low.
Step 1: Select a screws that fit the thickness of the door and insert the bolt Machine
Step 2: Pass the cable through the peephole outside the door
Step 3: After straightening out the lines as shown in the figure;Thread the screws through hang plate
Step 4: Tighten the fixed screws in sequence
Step 5: Buckle the doorbell wire in the correct direction
Step 6: Install the doorbell host on the hanging plate