About this product
Country of OriginMainland China
Product description
[Electric Sprayer]OurElectric Foam Sprayer Just gently press the electric pressurized button, the foam sprayer can produce a large amount of viscous snowflake foam.The foam is even and rich.Fully electric pressurized foam, no need to manually pressurize, no longer need to worry about insufficient pressure during the car wash process resulting in low and uneven foam. When fully charged, it can easily wash multiple cars.
[Powerful Cleaning Effect]This electric car wash foam spray bottle adopts a fan-shaped spray design, and the spraying effect is clearly visible.Its extra large 70° large fan spray range can evenly cove r the entire car body, ensuring the richness of fully emulsified foam and effectively cleaning dirt and oil stains.
[Easy to Carry] Simply mix water and detergent in the proper ratio to easily and instantly create foam.No need for a pressure washer, foam gun or garden hose, no need for any connecting plugs, allowing you to wash your car anytime, anywhere.Suitable for any type of car detergent/pressure washer soap (Note: Fill with water up to 1.5L)
[Safe and Reliable Design]This watering bottle adopts a safety upgraded pressure relief valve design. Before opening the lid, you only need to manually press the pressure relief valve button and wait for the pressure relief to be completed before it can be opened safely. Effectively prevent the risk of high-pressure bottle ex-plosion.
[Multifunctional Use]Electric foam sprayer can easily spray a large amount of foam, not only can be used for car cleaning and window cleaning, but also can be used for kitchen cleaning, glass cleaning, bathroom cleaning, pet bathing, flower spraying and so on.
[Product name]: Electric foam watering can
[Product capacity]: 1.5L, large capacity can spray 6 cars
[Maximum air pressure]: 8 BAR
[Battery capacity]: 1500mAh*2
[Packaging size]: 28*18*12cm
[Single weight]: about 577g
[Use time]: 30min, Spray one car only need 2 minutes
[Uses]: car washing, kitchen cleaning, watering flowers, Gardening Spraying, Wall Cleaning ect.
[Feature]: 70 degree wide angle spraying
[Product material]: pe+pp+electronic components
1. The black cover part of the watering can is composed of electronic components, please do not wash it!!!
2. The spray bottle is suitable for spraying non-corrosive liquids for household cleaning and car cleaning.Do not use it for spraying acid, alcohol, gasoline and other highly corrosive liquids.
3. Do not exceed the maximum capacity of the solution to avoid liquid leakage.
4. There will be a delay of a few seconds when the product is turned on and pressurized. There may be liquid dripping from the nozzle when it is first turned on. It will spray normally after a few seconds.
5. After each use, the residual pressure in the watering can should be released, the container should be emptied, and the container should be cleaned and rinsed carefully with clean water.
6. Products will be tested before leaving the factory. It is normal for a small amount of water to remain in the watering can.
1.If a few of water in the watering can but no water comes out - (it may be that there is no seal and air leakage leads to insufficient pressure), please check whether the accessories are complete and installed correctly;
2.If the foam flows slowly and sprays in a straight line - (the pressure in the watering can are no enough), please continue to press for 5-15 seconds to increase the pressure.When the pressure in the watering can rises, it can spray normally; the lower the water level, the more pressurization is needed, The longer time is needed, the maximum water level is 1.5L
3.If there is water or air leakage at the nozzle interface - (the accessories may be installed incorrectly or at a slight angle), unscrew the nozzle and clean it, then align it and tighten it.
Attention!After use, there is still pressure in the watering can.Please press the blue pressure relief button before opening the lid.It is recommended to fill the watering can with clean water and spray it for 3-10 seconds after use, Clean the inner tube to prevent some water wax from solidifying and causing blockage.