About this product
- Country of Origin:Mainland China
Product description
Press the unlock button and lock button at the same time (some shells are up and down button), after the LED indicator flashes three times, loosen one of the buttons while the other keeps pressing, and then press the "release" button three times, The LED indicator will enter the fast flashing state. At this time, all memory data is erased, the cleared remote control will not light up the LED indicator no matter which button you press.
One hand holds the original remote control and the other hand holds the remote control for copying, the two remote controls should be placed as close as possible (the ideal situation is to place the two remote controls on the desktop near the zero distance), respectively, on the Copy button, when the LED flashes quickly after three flashes, is this copy successful, other important operating methods are the same. Some remote controls have a lower transmitting power, so the original remote control must be placed back to the copied remote control to work. For the presence of noise, it must prevent the operation from being disturbed; if the copy is unsuccessful, it must try again after cleaning the code.
Clean up your test code before copying.
Press the upper 2 buttons at the same time until the LED light flashes three times fast, then release one of the buttons (the other keeps pressing) and press this button three times, then release both buttons after the LED lights up quickly. The LED light does not turn on when a button is pressed, this means that you have cleared the code.
Hold a button on this remote control and also on your remote control, make them close to get a signal within 3 seconds, the LED light flashes quickly and then always on, then release the button. Try pressing this button, the LED indicator turns on, this means that you have successfully copied. Follow the same steps for other buttons.
If you accidentally delete useful codes, you can simultaneously press 3 and 4 buttons until the LED flashes quickly three times and then successfully recovers.
Easy to use, 4-channel remote control The operating system allows you to control your gadgets, car, home and garage.
This is not a complete list! If your remote is using the 433MHz frequency, it will work with an external duplicator (Note: Remote rollover code does not work).
The IC model of the original remote control is 2262 2260 1527 2240 and compatible IC.
The battery used in the product is 27A 12V, replace the battery if the remote control distance is insufficient.
Clone up to 4 external signals from 4 different remote controls.
With this remote control, you can keyfobs all 433MHz fixed code.
Some remote controls that use this frequency are listed below.
4-channel RF wireless remote control for cars, garage doors, gates, alarm systems, etc.
This is a fixed frequency (433MHz) external cloner for copying regular fixed and learnable remote control codes.
2260 (all manufacturers), 2262 (all manufacturers), PT2264 (all manufacturers), 5326 (all manufacturers),
527 (all manufacturers), 1527 (all manufacturers), 2240 (all manufacturers)
HT6026, HT6012, HT6014, HT600, HT680, HT6010, HT6207, HT640, HT6P12E, HT6P20D, 12L-4SC
PT2292, 12L4SC, SC5262, PLC68, NF9420116, UM3750AM, SMC918, SMC908, 1416, 5211
HCS101, HCS200, HCS201, HCS300, HCS301 (part of code)
Packaging method: open cell polyurethane foam
Transmission frequency: 433 MHz
Transmission distance: 50-100m (open area, receiving device sensitivity is negative 100dBm)
Encoder type: fixed code. Learning code
Color: ABCD button/switch lock button/number 1234/up and down buttons
Function: Example Remote Control/Test Remote Control/Copy Remote Control
Size: 5.4 × 2.9 × 1.4 (cm)
The remote control is widely used, mainly used for remote control of electric sliding doors, elevators, remote controls, remote control of sliding doors, garage doors, sliding doors, remote control of LED lighting, remote control fireworks, remote control passenger doors, anti-theft alarms, electric door alarms, MP3 motorcycle anti-theft alarm, etc.