Search
S$3.50
S$4.37Save up to 20%
Electronic module 1/2/4/8 Way 5V High and Low Level Solid State Relay Module with Fuse Solid State Relay Module 250v2a
Sold by KIN-SG
Select options
Select
Shipping
From S$1.49
Est. delivery by Apr 23 - Apr 26
KIN-SG
1,360 items
Product description
What Is the Operating Temperature Range?
-20 to 70 Degrees
Relay Is Neutral Relay Only Supports 5V but Not 12V/24V
1.5V Low Level Solid State Relay Module
Product Introduction: 1. Umron 5V Solid State Relay 240V 2a, Output with Resistance Fuse 240V 2a.2, Size:
1 Road: 25*34*25 (Length * Width * Height) Net Weight: 13G
2 Channels: 55*33*25 (Length * Width * Height) Net Weight: 21.5G
4 Roads: 57*55*25 (Length * Width * Height) Net Weight: 40G
8-Way: 106*56*25 (Length * Width * Height) Net Weight: 70G
3. Input Power Supply: 5V DC (160ma) 4. Input Control Signal Voltage:
(0-2.5V State Low Level Relay on) (3.3-5V State High Level Relay off)
Module Interface:
Input Section:
DC +: Connect to the Positive Pole of the Power Supply (Power Supply According to the Relay Voltage)
DC-: Connect to the Negative Pole of the Power Supply
CH: Relay Module Signal Trigger Terminal (Low Level Trigger Is Effective)
High and Low Levels:
High Level Trigger Refers to the Presence between the Signal Trigger Terminal (in) and the Negative Electrode of the Power Supply
A Forward Voltage, Usually Connected to the Trigger Terminal by the Positive Electrode of the Power Supply
This Kind of Trigger Mode: When the Trigger Terminal Has Positive Voltage Or Reaches the Trigger Voltage, the Relay Is Closed.
Low-Level Trigger Refers to the Voltage between the Signal Trigger Terminal and the Negative Electrode of the Power Supply.
If It Is OV, Or the Voltage of the Trigger Terminal Is Lower than That of the Positive Electrode of the Power Supply,
When the Voltage Is Low Enough to Trigger, the Relay Is Closed, Usually the Power Supply
The Negative Pole Is Connected with the Trigger End, Which Makes the Relay Pull in.
Electrical Parameters:
Voltage Version Static Current Work Current Trigger Voltage Trigger Current
5V 0mA 12.5mA 0-1.5V 2mA
Product Instructions:
1. Power Supply of the Module: the Power Supply Must Be DC, Electric
The Voltage Should Be Consistent with the Voltage of the Relay.
2. Wiring Method:
When the Signal Trigger Terminal Is Triggered at a Low Level, the Relay Will Be Turned on and the Device Will Work with Electricity.
Explore more from KIN-SG
No more products
Open TikTok