36W Electric Dual Purpose Solder Absorber Electric solder absorber HB-019 Sucker Welding Desoldering Pump Iron Gun

Material: High temperature resistant material

Maximum suction: 5 (cm Hg)

Power: 36W

Working voltage: 220V/110V

Plug type: EU plug/US plug

Scope of application: Fused tin+Absorbed tin

Usage:

1、 The voltage used for the solder absorber is 220V-50Hz, and the power is 36W

2、 Turn on the power and preheat for 3-5 minutes

3、 Push down the piston handle to clamp it, align the front end of the tin suction iron nozzle with the solder joint of the component to be removed, wait for the solder to melt, press the control button, and the solder will be sucked into the air cylinder

4、 The tin suction device is equipped with two suction nozzles with different diameters, which can be selected according to the thickness of the component leads

5、 When welding, perform the same operation as using an electric soldering iron

6、 When a new tin absorber is first used, it may emit slight smoke due to the heating of the electric heating element, which is a normal phenomenon and will naturally disappear after ten minutes

7、 During use, a soldering iron holder with a natural heat dissipation structure must be used and placed inside the soldering iron holder

8、 If the power cord is damaged, to avoid danger, it must be replaced by the manufacturer or its maintenance department or similar dedicated personnel

9、 This product has a grounding wire and should be used with a socket with a contact point. Users are advised to use it with caution for safety reasons.

Packaging list: