Universal Car Fuse Holder Box 32V DC 6-Way with Independent Negative Function for Vehicle Car Boat Marine Auto Electrical Line Protection

[Product model]: CS-978A1

[Product net weight]: 174G

[Product gross weight]: 177G

[Product size]: 120*50*52mm

[Product material]: PA66 body, PC dust cover, nickel-plated copper terminal, stainless steel screws, PP×70 sticker

[Input rated voltage]: 32V

[Input rated current]: 75A

[Output maximum current]: 20A per circuit

[Main line terminal]: M6 threaded stud (75A 32V DC maximum)

[Main line conductor]: #4-6AWG

[Single line terminal]: M4 threaded stud (20A 32V DC maximum)

[Single-wire conductor]: #12-16AWG

[Fuse type]: Accepts ATO or ATC fuses from 1A to 20A

[Installation range]: Can be installed on cars, villas, RVs, buses, yachts, boats, etc.

[Scope of use]: Can be directly connected to the circuit of any electrical appliance on the car/boat [such as: roof lights, car headlights, width lights, fog lights, warning lights, car refrigerators, car chargers, car fans, car TVs, etc.]

[Product accessories]: Stickers X2; Self-tapping screws X4

[Product accessories (with fuse)]: stickers x2; self-tapping screws x4; 20A fuse x4; 15A fuse x2; 10A fuse x2; 5A fuse x4

[Fuse function]: When a circuit fails or is abnormal, the current continues to increase, and the increased current may damage some important or valuable components in the circuit, and may also burn the circuit or even cause a fire. Fuses protect electronic equipment from overcurrent damage and can also avoid serious damage to electronic equipment caused by internal faults. Therefore, each fuse has a rated specification, and the fuse will blow when the current exceeds the rated specification. If the fuse is correctly placed in the circuit, then when the current abnormally rises to a certain height and a certain temperature, the fuse will melt and cut off the current, thereby protecting the safe operation of the circuit.

[Product advantages]: [1] The product uses PA66 flame-retardant, high and low temperature resistant and environmentally friendly material, which fully meets the conditions that [the fuse holder must have good mechanical strength, insulation, heat resistance and flame retardancy, and should not break, deform, burn or short-circuit during use].

[2] All fuse clips are nickel-plated copper, which has corrosion resistance and excellent conductivity.

[3] All fasteners are stainless steel, and the input and output ends of the fuse box are fixed with tightening screws, which can be installed more quickly. The fuse box is fixed with self-tapping screws, which is simpler and safer to install.

[4] The product comes with a sticker, which can be attached to the corresponding electrical appliance according to the name on the sticker. When the fuse is broken, we can immediately identify which electrical appliance has a problem, saving time and effort