30A MPPT Solar Charge Controller 12V/24V DC Input with 18V/36V Solar Panel LCD Display Solar Panel Regulator

*1. Industrial-grade Master Control Chip offers 16-grade AD sampling accuracy in monitoring the temperature, charging current and discharging current, and clear power generation at a glance.

*2. Automatic focusing MPP tracking charging, high charging efficiency, non-stop detection in the charging process, two-way focusing tracking.

*3. Large LCD display allows the charging and discharging parameters adjustment. As long as you understand the battery characteristics and set the corresponding charging parameters, you can charge any battery, and the output power off and off can be adjusted, which is more convenient.

*4. Complete three-stage charging management, effectively protect the battery, and the battery is more durable.

*5. Built-in overheating, overcurrent, short circuit, open circuit, reverse connection protection, when the fault is eliminated, the controller will automatically reply without damaging the equipment.

*6. Two-way moss tube is placed in the irrigation circuit, with high-power charging mode and ultra-low heating.

Description:

*1. System Voltage: 12V/24V(adaptive)

*2. Rated Charging Current: 30A/40A/50A/60A/100A

*3. Rated Discharge Current: 10A/10A/20A/20A/30A

*4. Solar Photovoltaic Voltage: 18V solar panel(12V), 36V solar panel(24V)

*5. Full-charge Voltage value: 12.2 V for lithium battery, 14.2 V for B02 colloidal type and 14.6V for B03 open type

*6. Floating Charge Voltage: 13.7V (the default value is adjustable)

*7. Discharge Static Voltage: 10.7V (default value, adjustable)

*8. Discharge Recovery Voltage: 12.6V (default value, adjustable)

*9. Standby Voltage: < 10mA

*10. USB Output: 5V/2A Max

*11. Working Temperature: -35°C to +80°C

*12. Size: 170*95*45mm

Attention:

*1. This controller is equipped with an 18V/36V solar panel. Please ensure that the battery has enough voltage when installing for the first time so that the controller can identify the correct battery type.

*2. Install the controller as close as possible to the battery to avoid the voltage drop caused by the long wire and affect the normal voltage judgment.

*3. This controller is suitable for all kinds of lead-acid batteries (including open, sealed and colloidal batteries). If charging other batteries, you must be familiar with their battery characteristics and set appropriate charging parameters. For example, when charging a 12V lithium battery, the output protection is set to 9.5V, the full protection is 12.2V, and the starting charging pressure is 11.5V when the battery drops.

*4. This controller can only use photovoltaic panel as charging power supply, please do not use DC or other power supply as charging power supply.

*5. This controller will generate heat when it is running. Please pay attention to installing the controller on a flat and universal surface.

Package Includes:

1 x Controller