300Mbps Wireless WiFi Repeater 2.4G Signal Router 802.11N Long Range Wireless WiFi Extender Amplifier WIFI Booster

1. Signal Boosting Device: This WiFi range extender can help amplify your wifi, extend the signal to a longer distance, and eliminate wifi dead zones, so you can use the network in any area of your home. You don't have to worry about weak signals due to distance, walls and floors.

2. Multiple Working Modes:

①Repeater mode can easily expand your wifi range without cables, which is more convenient.

②AP mode can create a new wifi hotspot for sharing, so you don't need to disclose your private wifi.

③Router mode: amplifies the signal.

3. High Transmission Rate: 300Mbps high transmission rate, providing a smooth and stable connection for your equipment without buffering or lag. 2.4G frequency band signals can cover a longer range and provide better wall-passing capabilities.

4. Universal Compatibility: Support IEEE802.11 b/g/n standard, compatible with all related devices in the home or office, such as: TV, computer, smart phone, wifi camera, wifi smart plug and other smart home devices.

Parameters:

Material:ABS

Gross weight: 169g

Net weight: 95g

Packing size: 197*96*80mm

Product size: 180*56*33mm

Transmission medium: five types of lines

Relay distance: 100 (Km)

Power requirements: 110-220V

Lightning protection: There is lightning protection

Protocol: Support IEEE802.11 b/g/n

Transmission rate: 300Mbps

Network port: 100M x 2

Supports router, trunk, and AP modes

Note:

1. When the transmitter is plugged in and used, search for Repeater-XXXXXX on wifi of the mobile phone or computer, and after clicking the connection, it will automatically jump to the setting page (Note: If the jump interface does not appear after clicking the connection on the mobile phone, please click "Ignore this network" and then turn on wifi again to reconnect to WIFI. If this operation still does not work, you can manually enter the URL "192.168.11.1" in the browser.)

2. Use the relay mode. If the WIFI name cannot be found, try to turn the WIFI switch on the phone again. If not, press and hold the reset button on the side until the switch light flashes and releases, then repeat the above steps

3. If the AP mode is required for connecting the network cable, insert the repeater, select the AP mode, and set the password before connecting the network cable. Otherwise, the password cannot be set before connecting the network cable