Green Gator Skin Alligator Snake Lizard Animal Hydrographic Water Transfer Film DIY Hydro Dipping Dip Demon 0.5 x 40M

1. Primer: decontamination, degreasing, rust removal, impurity removal or flame treatment according to the material of the workpiece to be transferred;

2. Drying: choose the appropriate temperature to dry the primer according to the nature of the primer;

3. Film selection: select the pre-transfer pattern or customize it according to the solution provided by the customer;

4. Set the film: cut the film paper of the same size as the workpiece to be transferred, and lay it flat on the water surface (the printing side is facing down);

5. Activation: When the film paper sits on the water surface for 60-90 seconds

6. Transfer printing: about 5-10 seconds after spraying the activator, keep the belt transfer workpiece at a 35-degree angle to align the film

7. Soak: soak the transfer workpiece for about 30 seconds, so that the ink can be more stably attached to the workpiece

8. Rinse: Note that the water pressure should not be too large, otherwise it will easily cause damage to the transferred graphics.

9. Drying: about 50 to 60 °C.

10. Topcoat treatment Dry the object after apply the top coat.

Final Product

The hydrographic process can be used on metal, plastic, glass, hard woods, and various other Any three-dimensional objects can be printed

Auto, Motorcycle Parts & Accessories,Furniture, Hotel Lobby Decoration..... Decorative Paint type Packaging & Printing,sticker DIY Vehicle modification

Water transfer printing film,3D cubic printing film, Hydro dipping film,Hydrographic film, Hydrographic Printing Film , Water Soluble Printing Film ,Hydrographic Films , 3D Cubic Printing Film, Liquid Transfer Printing Film,aqua print film,pva film

Film pattern ：Animal skin,Skull,Frame,Woodgrain,Carbon fiber, Flower, Marble, Camoflauge,Design.