Product description
This Brand New 1803BK DC Motor Speed Controller allows controlling the direction of a DC the motor using a Pulse-Width-Modulated (PWM) DC voltage with a Duty Cycle fully the product adjust from 0%-100%.
With a self-recovery fuse 2A and a Power-On LED light.
Enable to provide a continuous current of 2A to your DC motor or other DC load.
Specifications:
Input supply voltage:1.8V-15VDC
The max output power:30W
The max continuous output current :2A
Duty Cycle adjustable: 0%-100%
Size: approx. 32*32*15mm/1.25*1.25*0.59''
Net weight: approx. 14g
Note: DC motor speed regulator DC power supply, do not be directly connected to household 220V AC.
Please allow 1-3mm differs due to manual measurement.
Due to the different display and different light, the picture may not reflect the actual color of the item. Thanks for your understanding.
100% brand new and high quality
Operating Voltage: DC3V-35V
Control Power: 90W (maximum)
Quiescent Current: 0.015A (standby)
The input voltage is divided into two gear positions, and the default short-circuit contact is suitable for 5-35V input, such as
The short-circuit connection is suitable for low-voltage 3-15V input. The delivery default is to disconnect the short-circuit connection for 5-35V input. If necessary, the low-voltage input file can be changed by itself;
5V 12V 10A Voltage Regulator 5V-16V DC PWM DC Motor Speed Controller Governor Stepless Speed Regulator LED Dimmer Power Controller Motor
Short maximum current: 20A (less than 10 seconds)
Speed control mode: PWM stepless speed regulation, can also be used to adjust the light
Control mode: speed control potentiometer (clockwise clicked open, continue to rotate clockwise from 1% to 99% speed)
Duty cycle: 0%-99% (0% position is the state of the switch off when the potentiometer is most on the left).
When the current is switched on, the 0.002A (long time no need to switch off the governor is no current).
Efficiency: the maximum efficiency is as high as 98%.
Volume: long 3cm (excluding potentiometer), wide 2cm, high 1.4cm
Note that the governor is mainly used in motor speed control, if you are used to LED dimming, must ensure that the LED can also work in direct power supply, the dimming range of the speed governor is from LED to LED directly connected to the power supply is completely extinguished between dimming, if LED is directly connected with a power that will burn through dimmer the dimming is burned, which typically requires a series current limiting resistor.
Note: The module needs to be connected to the load, and the output voltage of the potentiometer will be adjusted to change. The measurement output of the multimeter will not change if the module is not connected to the load.