0.5 x 40M Marble-Cloud Marble Water Transfer Film Hydro Printing Film PVA Decorative sticker DIY hydrographic film

1. Primer: decontamination, degreasing, rust removal, impurity removal or flame treatment according to the material of the workpiece to be transferred;

2. Drying: choose the appropriate temperature to dry the primer according to the nature of the primer;

3. Film selection: select the pre-transfer pattern or customize it according to the solution provided by the customer;

4. Set the film: cut the film paper of the same size as the workpiece to be transferred, and lay it flat on the water surface (the printing side is facing down);

5. Activation: When the film paper sits on the water surface for 60-90 seconds

6. Transfer printing: about 5-10 seconds after spraying the activator, keep the belt transfer workpiece at a 35-degree angle to align the film

7. Soak: soak the transfer workpiece for about 30 seconds, so that the ink can be more stably attached to the workpiece

8. Rinse: Note that the water pressure should not be too large, otherwise it will easily cause damage to the transferred graphics.

9. Drying: about 50 to 60 °C.

10. Topcoat treatment Dry the object after apply the top coat.

Final Product

After drying, then you have the final product.e

The hydrographic process can be used on metal, plastic, glass, hard woods, and various other Any three-dimensional objects can be printed

Auto, Motorcycle Parts & Accessories,Furniture, Hotel Lobby Decoration..... Decorative Paint type Packaging & Printing,sticker DIY Vehicle modification

Water transfer printing film,3D cubic printing film, Hydro dipping film,Hydrographic film, Hydrographic Printing Film , Water Soluble Printing Film ,Hydrographic Films , 3D Cubic Printing Film, Liquid Transfer Printing Film,aqua print film,pva film

Film pattern ：Animal skin,Skull,Frame,Woodgrain,Carbon fiber, Flower, Marble, Camoflauge,Design.