6/8/10/12mm Universal Fuel Pump Rubber Manual Liquid Oil Transfer Pump Petrol Diesel Hand Primer Bulb for Car Marine Outboard

 

1. Need to squeeze the rubber ball continually.

2. Have to keep pumping, then the flow rate can be controled.

Self-check Points When Siphon Pump Can't Work Normally:

 

1. The source container which you want to get rid of fluid is placed HIGHER than the target one.

2. Both of the source container and the target one are not in a sealed state.

3. Both of the hoses should be installed to the rubber ball, it can't work with only one hose installed on one side.

4. The indicator arrow which on the rubber pump towards to the oulet side, down to the target container.

5. Both of the hoses are not knotted or twisted together.

6. Exhaust the gas out from the hoses before using.

7. Keep the end of the two hoses inside the containers during using, NOT just on the surface.

Please Note:

 

1.If the siphon pump hoses have kinks, please try to soak the kink part into a small amount of hot water for 1-3 minutes to restore it, then will not affect the use of function.

2. Not suitable for drink water, salt water and any chemical liquids.

Package Includes:

 

1x Hand pump