HDD/SSD Hard Drive Cable Connector For Vivobook X409 F409 X509 F509 R521

* brand new high quality

*Made of high-quality materials,

*Suitable for VivoBook S6 X409 F409 X509 F509 R521 Y4200 Y5200 6th generation 6th generation FL8700

*Using sata3 high-speed interface, fast speed, stable, can be directly connected

*To 2.5-inch for SATA port hard disk(mechanical hard disk and SSD can be used).

*The outer layer of the cable is wrapped with aluminum foil, which has strong anti-interference ability and stable

2. Product parameters:

Colour: Black

Length: about 8-10CM

Compatible models:

1. Y4200 Y5200 and the 6th and 6th generation FL8700

2, VivoBook 14:

X409F, F409F, A409F, R427F, X409U, F409U, A409U, R427U

3. VivoBook 15:

X509U, F509U, A509U, R521U, X509F, F509F, A509F, R521F

[Installation instructions] First shut down and power off, unscrew the screws on the back of the fuselage, remove the back cover of the machine, put the connected hard disk on the shock-proof barrier and put it into the hard disk slot of the fuselage.

Then the buckle of the ten-pin small interface on the computer motherboard(marked with HDD) must be lifted up first(remember to lift it to a degree greater than 90 degrees and less than 120 degrees, and then in the cable, Remember).

Then insert the interface cable with the blue side up, remember to insert the cable to the end and insert it correctly, and then press the interface pressure plate to lock it,(pay attention to a detail: the cable can be inserted in place, and the cable should be pulled gently., The state can not be pulled out, another note: the hard disk cable clamps and the motherboard wiring clamps are relatively fragile, be careful when installing, do not pull, so as not to break the buckle)! Finally, when you boot up, you can see the second hard disk in the disk management.If you add a new hard disk, you need to format it in the disk management first.

3. Package contents:

1* hard drive cable, 1* silver spare cable

Note:

1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.