Poe Power Adapter 48V To 12V Poe Splitter Connector Injector Wifi F2SG

NEW 48V to 12V POE Splitter Connector Poe Power Adapter injector Switch for IP Camera Wifi Cable Wall US/EU Plug H1

Support the IEEE 802.3af the Power over Ethernet PoE Switch

Support 48V Unsolicited Power Over Ethernet PoE Switch

Support 48V Unsolicited Power Over Ethernet PoE Adapter

Specification:

Compliant with IEEE802.3af 15.4W

Isolation: 2.5kV

Power Input: DC44~57V

Power Output: DC12V 1A~2A(Rated 1.3A,max.2A)

Data&Power INPUT Port: from RJ45 female

Data Output Port: RJ45 Male

Power Output Port: 5.5x2.1mm DC Power Plug

Data Transfer Rate: 10/100Mbps

Devices will be detected before poe input

Power Pin:support both 1/2(+),3/6(-)

Body size: 80 x 27x 22 mm

DC cable length：165mm

RJ45 Modular Plug cable length：155mm

Weight : 55g

DC Out Power Pin: inside positive (+) outside negative (-)

Operation Temperatue:-20℃ ~ 60℃

Notice:

Yellow LED(power) will be light up when DC Port connects to the device.

Green LED(data) never light in any circumstances,two reasons are below,

1.This splitter allows data to input and output through its RJ45,but no indicator on this splitter indicats the status of the data transfer,only one power indicator shows the working status of the POE.

2.due to the cost problem,the network interface component is from the universal components which own two LEDs on the market.