Product description
*Car Reverse Rear View Camera
*Weatherproof, can be Used both in car and home
*High-definition and wide viewing angle
*Applicable to variety of Vehicles: car, truck, RV, mini-van etc.
*Easy to install, you can install the monitor via mount holder or bracket.
*Can help avoid incidents and accidents abrasion well
*Fitment: (for reference)
*Image Sensor: 1/3 "OV Color for CCD
*Effective Pixels: NTSC 512 (H)*492 (V)
*Horizontal Resolution: 420 TVL
*Minimum Illumination: 1.0Lux F=1.2 (0Lux with for IR on)
*Diagonal Viewing Angle: 120°
*Synchronization: Internal synchronization
*Signal to noise ratio: >48db
*Electronic Shutter: Auto
*Video Output: for RCA interface, 1.0Vp-p, 75Ohm
*Backlight Compensation: Auto
*Current Consumption: 50-60mA, Max 130mA with for IR on
*Operating Temperature: -20°C~ +60°C, RH95% Max
*Storage Temperature: -30°C ~ +80°C, RH95% Max
*Video cable length: 6m(Approx.)
*Power supply cable length: 100cm(Approx.)
*Camera Size: 80mm*33mm(Approx.)
1.Take out your license plate light at the back of your car.
2.Fix the camera to where the stock license plate light was.
3.Connect the built-in license plate light of the camera to where the stock license plate light was connected to get the power
4.Connect the power of the camera to your reverse lights - red wire to positive and black wire to negative.
5.Connect the video cable of the camera to the extension cord.
6.Connect the extension cord to your car monitor.
7.You will see the images when your car is in reverse shift.
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.